Hotpoint MWH221 manual 1500

2.4 HOW TO PROGRAMME THE OVEN TO KEEP FOOD HOT, TO REHEAT, AND TO COOK

1Push the button MICRO (4)

	(The display will start blinking at
	0:00 and the second microwave-
	function indicator at the top left		0:00
	will come on, as will	the first
	microwave-level indicator at the
	bottom right.)
	Set the time you wish to employ
2
	by turning the knob	(7). (The
	display will start blinking.)		15:00

3Push on the POWER LEVEL but- ton (12) until you have selected the desired power (5 = maxi- mum, 1 = minimum). If you do not use this button, the oven will operate at full power (power 5). (The indicator in the lower por- tion of the display will indicate the power level selected).

15:00

4Push the button START (14). (The display will show the time and power set up.)

15:00

5 Once the set time has elapsed, you will hear three long beeps, and at the same time the word End will appear on the display.

•It is possible to access the time of day even while the oven is operating. Simply push the button (8). The correct time will appear on the display for about 3 seconds.

•You can check on the progress whenever you please by opening the door and taking a close look at the food. The microwave energy will automatically stop but it will start again when you close the door and push the START button (14).

•If for any reason whatsoever it becomes necessary to interrupt the cooking without opening the oven door, simply push the STOP button (6).

•To stop the cooking, instead, do as follows:

-if the over door is open, push the STOP button (6) once;

-if the oven is operating, push the STOP button (6) twice;

-if the oven is turned off and its door closed, push the STOP button (6) once.

•The cooking time and microwave power can be changed even after you have pushed the START button (14) to activate the function desired.

19