Hotpoint MWH221 manual Programming Several Operations ONE After Another

2.10 PROGRAMMING SEVERAL OPERATIONS ONE AFTER ANOTHER

•You can set up the following sequences:

-defrosting + cooking

-cooking 1 + cooking 2

-defrosting + cooking 1 + cooking 2

Example: Setting up a defrosting + cooking sequence

1	Push the button DEFROST (11).
	(The figure 0:00 will start blinking
	and the	defrost-function
			0:00
	indicator at	the upper left will
	come on).

2Set the time you wish by turning

the knob (7).

(The display will start blinking)

6:00

3	Push the button MICRO (4).
	(The display will start blinking at
	0:00, and the second microwave-
	function indicator at the upper	0:00
	left will come on as well as the
	first microwave-level indicator at
	the lower right.)

4 Set the time you wish to employ

by turning the knob (7).

(The display will start blinking) 15:00

5	Push down on the button
	POWER LEVEL (6) until you have
	selected the power desired (5 =
		15:00
	maximum, 1 = minimum). (The
	indicator at the bottom of the dis-
	play will show the power level
	selected.)
	Push the START button (14) to
6
	begin the sequence.
		6:00
	(The display will show in order

the time of the function selected).

15:00

7 At the end of the sequence set up, you will hear three long beeps, and the word End will appear on the display.

29