Electrical Connection

WARNING - THIS APPLIANCE MUST BE

GB EARTHED.

CONNECT TO A 230-240V A.C. SUPPLY ONLY.

Connection to the electricity supply should be made via a properly earthed, readily accessible wall socket which is adjacent to but not directly above, and not more than 1.25m away from the appliance and capable of electrical isolation.

The mains lead should be routed such that it cannot touch hot parts of the cooker i.e. the back panel above a height of 650mm from the floor.

Should this plug not fit the socket outlet in your home it should be cut off and replaced with a suitable plug as outlined below.

NOTE: The removed plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug

it into a supply socket - with the obvious consequent danger.

IF THE FITTED PLUG IS REMOVED

The flexible mains lead must be correctly connected as below to a three pin plug of not less than 13 amp capacity. If a B.S. 1363 fused plug is used, it must be fitted with a fuse which is approved to B.S. 1362. IMPORTANT: The wires in the mains lead fitted to this appliance are coloured in accordance with the following code:

	Green &
	Yellow to
	Earth

	Brown
	to Live
Blue to	13 Amp
Neutral	Fuse
Cord
Clamp
GREEN AND YELLOW - EARTH
BLUE			- NEUTRAL
BROWN		- LIVE

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured green and yellow must be connected to the terminal in the plug which is

marked with the letter E or by the earth symbol or coloured green or green and yellow.

The wire which is coloured blue must be connected to the terminal which is marked with the N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

When wiring the plug, ensure that all strands of wire are securely retained in each terminal. Do not forget to tighten the mains lead clamp on the plug.

As the appliance must be earthed, do not use 2-pin sockets outlets, if you are in doubt, consult a

qualified electrician.

Should the mains lead ever require replacement, it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size i.e. 1.0mm2 cross sectional area PVC cable, available from our parts department (see Back Cover).

IF A MOULDED PLUG IS FITTED

In the event of replacing a fuse in the plug supplied an ASTA approved fuse to BS1362 must be fitted. NOTE: The fuse cover must be refitted when changing the fuse. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been obtained and fitted. A new fuse cover can be obtained from your local Electricity Board. The colour of the correct replacement fuse cover is that of the coloured marks or inserts in the base of the plug. Make sure that the cable does not become trapped when pushing the cooker into position.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

HAGL60K, HAGL60P specifications

Hotpoint, a well-respected name in home appliances, has introduced its HAGL60P and HAGL60K models, both of which are cookers designed for reliability, convenience, and performance. These models stand out in the market thanks to their user-friendly features and efficient cooking capabilities, making them ideal for both novice and experienced home cooks.

The Hotpoint HAGL60P is finished in a sleek white, while the HAGL60K boasts a stylish black exterior. Both cookers feature a contemporary design that complements various kitchen styles. With dimensions that ensure they fit seamlessly into most kitchens, their compact size does not compromise on cooking capacity.

One of the standout features of these models is the dual-fuel functionality. This means they combine the precision of a gas hob with the consistency and even heating of an electric oven. This combination allows home chefs to have maximum control over their cooking, whether they are simmering, boiling, or baking. The four gas burners are designed to cater to different cooking needs, providing versatile heat options for everything from quick stir-fries to gentle simmering.

In terms of safety, the HAGL60P and HAGL60K come equipped with a flame failure device. This technology ensures that the gas supply is cut off automatically if the flame goes out, providing peace of mind during cooking. Additionally, the models include a thermostat that maintains the oven temperature, ensuring dishes are cooked evenly.

Both cookers also feature easy-to-clean ovens and hobs. The enamel finish inside the ovens helps prevent food particles from sticking, making cleaning much more manageable. The removable burner caps on the hobs allow for straightforward upkeep, keeping your cooking surface looking pristine.

For added convenience, the HAGL60P and HAGL60K models come with grill settings and an integrated grill. This feature enables users to toast, brown, or melt food to perfection, thereby increasing meal options. Moreover, the ovens have a spacious capacity, which is great for cooking large meals or multiple dishes simultaneously.

In conclusion, the Hotpoint HAGL60P and HAGL60K cookers are ideal for individuals and families looking for versatility, safety, and efficiency in their cooking appliances. With their distinct features and thoughtful design, these cookers stand out as excellent choices for any modern kitchen.