Hotpoint HAGL60K Levelling, Conversion for USE on Butane G30 or Propane G31, Stability Chain

Page 7

Installation

LEVELLING

Four skid feet are fitted which can be adjusted up or down to level the cooker.

CONVERSION FOR USE ON BUTANE (G30) OR PROPANE (G31)

Each burner requires the injector to be replaced and bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Remove the enamelled baffle at the front of the grill (2 screws).

5.Remove the screw on the right hand side of the burner and gently slide the burner off the injector.

6.Using a 7mm socket, replace the grill injector as appropriate (see table on previous page).

7.Re-assemble the burner and baffle.

8.Inside the top oven, remove the central screw se- curing the burner retainer. Slide the retainer to the right slightly and lift away.

9.Lift the burner assembly and place on the floor of the oven to the right of the burner opening.

10.Using a 7mm socket, replace the oven injector as appropriate (see table on previous page).

11.Re-assemble the oven burner and retainer.

12.Replace the main oven injector following the same procedure as for the top oven.

13.Carefully pull off the control knobs and timer but- tons.

14.Remove the 2 screws securing the underside of the control panel. Slide the control panel to the left slightly to remove.

15.Remove the 6 screws securing the timer mounting panel. Without completely removing it, manoeuvre the timer mounting panel to gain access to the thermostat bypass screws.

16.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The main oven thermostat bypass screw is located on the body of the thermostat below the spindle, the top oven thermostat bypass screw is located on the body of the thermostat to the right of the spindle and the hotplate tap bypass screws are located down the centre of the spindle.

17.Re-assemble the control panel parts ensuring that when the connections are made to the ignition switch, the wires are above the switch rather than below.

18.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

STABILITY CHAIN

GB

A hole in the gas inlet valve bracket can be used to engage a stability chain.

CONNECTING TO GAS SUPPLY

670

300

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the shaded area shown, to allow the cooker to be pushed fully to the wall and to ensure that the flexible hose is only likely to come into contact with areas at the rear of the cooker that do not exceed a temperature rise of 70°C.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Operating Instructions ContentsIntroduction Never For your SafetyPlease read the precautions below before using your cooker AlwaysVery HOT Surfaces Category II2H3+ GB InstallationGAS Safety Installation & USE Regulations Adapting to different types of gas main and top ovenSpace for Fixing Technical DataGB Location Provision for VentilationStability Chain Connecting to GAS SupplyLevelling Conversion for USE on Butane G30 or Propane G31If the Fitted Plug is Removed Electrical ConnectionIf a Moulded Plug is Fitted Installation and Operational Checks Technical CharacteristicsOnly on certain models FeaturesMain Oven Control Control PanelControl Knobs for the gas burners Electronic Ignition for the Gas HobProgramming cooking Setting the clockSetting the minute minder Clock/Minute Minder OperationTo USE the Hotplate Safety Requirements for Deep FAT FryingHOW to Deal with a FAT Fire HotplateTo USE the Grill HOT When the Grill is UsedGrill Young Children should be Kept AwayMain Oven Fish Main Oven Cooking ChartYeast Mixtures Using the ‚SLOW COOK’ Setting for Slow Cooking Slow Cook SettingRelighting the Burner Guidance on Using the TOP OvenTop Oven To USE the TOP OvenTop Oven Cooking Chart Bread rolls, plait Mins Tea breads etc Heavy approximately 70 kg 155 lbs Care and Cleaning‚Stay Clean’ Panel Never use steam cleaners or pressure cleaners on ApplianceSide Opening Doors Cooker Finish Cleaning MethodTOP OVEN/ Main Oven Main OvenSomething Wrong with your Cooker Problem CheckDisposal of old electrical appliances Disposal of your productYear Parts Guarantee Months Parts and Labour GuaranteeGuarantee is subject to the following conditions Guarantee does not coverParts & Accessories Hotpoint ServiceUK 08448 24 24 Republic of Ireland 01 230

HAGL60K, HAGL60P specifications

Hotpoint, a well-respected name in home appliances, has introduced its HAGL60P and HAGL60K models, both of which are cookers designed for reliability, convenience, and performance. These models stand out in the market thanks to their user-friendly features and efficient cooking capabilities, making them ideal for both novice and experienced home cooks.

The Hotpoint HAGL60P is finished in a sleek white, while the HAGL60K boasts a stylish black exterior. Both cookers feature a contemporary design that complements various kitchen styles. With dimensions that ensure they fit seamlessly into most kitchens, their compact size does not compromise on cooking capacity.

One of the standout features of these models is the dual-fuel functionality. This means they combine the precision of a gas hob with the consistency and even heating of an electric oven. This combination allows home chefs to have maximum control over their cooking, whether they are simmering, boiling, or baking. The four gas burners are designed to cater to different cooking needs, providing versatile heat options for everything from quick stir-fries to gentle simmering.

In terms of safety, the HAGL60P and HAGL60K come equipped with a flame failure device. This technology ensures that the gas supply is cut off automatically if the flame goes out, providing peace of mind during cooking. Additionally, the models include a thermostat that maintains the oven temperature, ensuring dishes are cooked evenly.

Both cookers also feature easy-to-clean ovens and hobs. The enamel finish inside the ovens helps prevent food particles from sticking, making cleaning much more manageable. The removable burner caps on the hobs allow for straightforward upkeep, keeping your cooking surface looking pristine.

For added convenience, the HAGL60P and HAGL60K models come with grill settings and an integrated grill. This feature enables users to toast, brown, or melt food to perfection, thereby increasing meal options. Moreover, the ovens have a spacious capacity, which is great for cooking large meals or multiple dishes simultaneously.

In conclusion, the Hotpoint HAGL60P and HAGL60K cookers are ideal for individuals and families looking for versatility, safety, and efficiency in their cooking appliances. With their distinct features and thoughtful design, these cookers stand out as excellent choices for any modern kitchen.
Top Page Image Contents