Hotpoint EG52 installation instructions To Use The Grill, Relighting The Burner

Page 10

GRILL

CAUTION – ACCESSIBLE PARTS MAY BECOME HOT WHEN THE GRILL IS USED. YOUNG CHILDREN SHOULD BE KEPT AWAY.

TO USE THE GRILL

1.Open the grill door and remove the grill pan.

2.Push in and turn the control knob anti-clockwise to the large flame symbol. Press the ignition button until the spark lights the gas.

3.Turn the control knob anti-clockwise to the desired setting. Only turn the control knob between the large flame symbol and the small flame symbol when adjusting the setting.

4.To turn off, turn the control knob fully clockwise to the symbol O.

Slide the grill pan along the chosen runner towards the rear of the grill compartment until it stops.

An odour may be noticed when first using the grill. This should cease after a short period of use.

DO NOT use the grill with the door closed.

DO NOT cover the grill pan or grid with aluminium foil as this can hold fat, intensify the heat and create a fire hazard.

Grilling can be started from cold but for best results preheat for approximately two minutes. Most cooking is done with the heat on full, but it may be necessary after sealing the food to reduce the heat as required.

For au gratin dishes eg. Macaroni Cheese and meringue toppings eg. Baked Alaska, place the dish on the floor of the grill compartment.

The base of the grill pan can be used for warming fruit garnishes on the reduced setting.

NOTE: Strong detergents used in dishwashers may damage the grill pan grid finish; clean in soapy water as described in CARE AND CLEANING section.

Always ensure that the grill pan handle is securely fastened to the grill pan. If necessary tighten any loose screws with a screwdriver

RELIGHTING THE BURNER

In the event of the burner flames being accidentally extinguished, turn off the burner control and do not attempt to re-ignite the burner for at least one minute.

10

Image 10
Contents Instructions for Installation and Use Use and Installation InstructionsEG52 Installation Instructions CONTENTSFor Your Safety PAGEINTRODUCTION FOR YOUR SAFETY ALWAYSNEVER CLOCK/MINUTE MINDER OPERATION SYMBOLSSETTING THE TIME OF DAY CLOCKFACE13.23 TIMER FUNCTION BUTTONSSETTING THE MINUTE MINDER Minute MinderHOTPLATE TO USE THE HOTPLATESAFETY REQUIREMENTS FOR DEEP FAT FRYING HOW TO DEAL WITH A FAT FIRETO USE THE GRILL GRILLRELIGHTING THE BURNER OVEN - FAN COOKING OVENTO USE THE OVEN Baking MeatFan Oven Cooking COOKINGTHE SLOW COOKING ‘S’ SETTING PREPARING FOOD FOR SLOW COOKINGOVEN HEAT CLEAN LININGS CARE AND CLEANINGREPLACEMENT OF OVEN LIGHT BULB Vitreous Enamel CLEANING METHODCOOKER FINISH PaintDROP DOWN DOORS CLEANING THE DOORSSIDE OPENING DOORS Remove the door inner glass as followsSOMETHING WRONG WITH YOUR COOKER PROBLEMCHECK grill / oven used first Slight odour or smallamount of smoke when timeMODEL NUMBER EG52 Category I2H GB. IE INSTALLATION INSTRUCTIONSGAS SAFETY INSTALLATION & USE REGULATIONS LOCATIONTECHNICAL DATA DIMENSIONS INSTALLATION INSTRUCTIONSGENERAL COOKER HOODS SPACE FOR FIXINGUNPACKING THE COOKER VIEWED FROM REAR STABILITY BRACKET CONNECTING TO GAS SUPPLYLEVELLING 220mmCONNECT TO A 230-240VA.C. SUPPLY ONLY ELECTRICAL CONNECTIONWARNING - THIS APPLIANCE MUST BE EARTHED IF THE FITTED PLUG IS REMOVEDINSTALLATION AND OPERATIONAL CHECKS Page Page Page Extended Warranty ServiceRepair Service Genuine Parts & Accessories Mail Order Hotline