Electronic timer
This function displays the time and works as a timer which counts down to zero.
Note: All functions will be implemented approximately 7 seconds after they have been set.
Resetting | After the appliance has been connected to the power supply, or after a power cut, the clock | |
the clock | display will begin to blink, showing the figure: 0:00 | |
| • | Press button G and then buttons - and + to set the exact time. Press and hold the |
buttons to quicken the count upwards.
Any necessary modifications can be made by repeating the above process.
Timer feature
This function may be accessed by pressing the n button, after which the display will show
the symbol n. Every time the + button is pressed it corresponds to a time increase of 10
seconds, until it reaches 99 minutes and 50 seconds. After this point, each press of the button represents an increase of one minute, up to a maximum of 10 hours.
Pressing the - button reduces the time.
After the time period has been set, the timer will begin to count down. When the timer reaches zero, the buzzer will sound (this may be stopped by pressing any button).
The time may be displayed by pressing the G button, and the n symbol indicates that the
timer function has been set. After approximately 7 seconds, the display will automatically revert to the timer.
Cancelling a | Press the - button until the display shows 0:00. |
time that has |
|
already been set |
|
Adjusting the | After selecting and confirming the clock settings, use the - button to adjust the volume of the alarm |
buzzer volume | buzzer. |
|
25