ENGLISH
(2)Presetting Procedure
•Functions can be preset using the buttons on the front panel.
•The presettings can also be set using serial remote signals (RS232C/RS422A).
•Presettings can be made when no cartridge is loaded or when in the stop, standby, pause, recording pause or recording monitor mode.
Enter the preset mode.
Press the STANDBY/CUE button while pressing the
MODE button.
1 |
| Character display |
|
|
|
Select the preset item.
Turn the select knob.
Character display
| Turn the knob |
|
2 | clockwise to move in |
|
the direction of the |
| |
| arrows, |
|
| counterclockwise to |
|
| move in the opposite |
|
| direction. |
|
| NOTE: The first preset item displayed is the last preset | |
| item displayed the last time the presettings were | |
| made. |
|
|
|
|
| Change the preset values. |
|
| Press the select knob. |
|
| The character display changes as | |
| shown below. |
|
Before change | After change | |
|
| Flashing |
Playback speed select.
Turn the select knob to select the pitch.
Flashing
Press the select knob to set the pitch.
Lit
Exit the preset mode.
Press the MODE button.
MODE
4
The preset mode is canceled and the set returns to the previous mode.
To set the presettings back to the initial settings (the settings set upon shipment from the factory).
Turn the power on while holding in both the SEARCH 7 and the SEARCH 6 buttons. For the initial settings, refer to “(1) List of preset functions”.
5
The character display changes as shown below.
NOTE:
If the message shown below appears, there is a problem with the preset memory. Contact a serviceperson.
InitialError
NOTE:
The playback speed is the most recently set playback speed. For example, if the pitch is set with the presettings then set from the keyboard, the pitch set from the keyboard is used.
14