Denon DN-M991R Editing Function Select, Erasing Cue Signals ‹Cue erase function›

ENGLISH

(2)Editing Function Select

1Load the cartridge.

Set the edit mode. Press the MODE button.

2	Lit
	Lit	Lit
	Select the edit track.
3-1	The track to be edited can be selected
	(or changed) by turning the SELECT
	knob.

Set the edit function select mode.

Select the edit track and press the SELECT knob.

3-2

NOTE:

“Cue Erase?” is not displayed if no cue signal is set.

Select the edit function.

Turn the select knob.

4

NOTES:

•“Cue Erase?” is not displayed if no cue signals is set.

•“Divide?”, “Combine?” and “Move?” are not displayed in the stop mode.

After selecting the edit function in item 3, perform the operations for the various edit items.

5	Cue Erase?	page 30	Move?	page 33
	Track Erase?	page 31	Pitch? **.*%	page 33
	All Erase?	page 31	Disc Name?	page 34
	Divide?	page 32	Track Name?	page 34
	Combine?	page 32

Cancel the edit mode.

6Press the MODE button before press the SELECT knob. Cancel the edit function. (after selected the edit item.) Press the MODE button before press the REC button.

(3) Erasing Cue Signals ‹Cue erase function›

Set the cue mode at the position of the cue signal you want to erase.

Press the CUE SERCH button.

1-1

Lit

The cue direct search mode is set.

Press the STANDBY/CUE button.

Flashing Lit

1-2

Flashing

NOTE:

Press the CUE button again to search for “Cue2”, “Cue3”, etc., and set the cue.

Select the cue erase edit function. (see page 30.)

Select “Cue Erase?” and Press the SELECT knob.

2

Erase the cue signal.

Press the REC button.

3 Lit Off

The cue signal is erased and the mode returns to the edit mode.

30