Denon DN-M991R Set the presettings, Set the recording pause mode, To stop recording

ENGLISH

(8)Starting Recording Automatically by Detecting the Input Level

This function makes it possible to start recording by detecting the input signal level.

Set the presettings.

Make the following settings, referring to “Preset Functions and Operations” on Page 13.

16)RecLv (–**) dB

1Recording starts when a signal with a level at or above the set level is input.

17)RecOffset (*)

Recording begins this number of seconds before the point where the set level is detected.

Set the recording pause mode.

Press the REC button.

2

Flashing Lit (orange)

Set the recording level start mode.

Press the LEVEL START button.

3 Flashing

NOTE: If the LEVEL START button is pressed while the button is flashing, the recording level start mode is canceled.

Start recording.

Press the PLAY/PAUSE button.

PLAY/PAUSE	PLAY/PAUSE
	REC		ON/OFF
4	Flashing	Lit	LEVEL	Lit
			START
	(orange)

Recording starts when an input signal with a level at or above the set level is detected.

When the LEVEL START button is pressed in the input signal detection mode, recording starts immediately.

4	During recording
(continued)	PLAY/PAUSE	REC		ON/OFF
				LEVEL
		Lit	Lit	START	Lit

To stop recording:

5Press the PLAY/PAUSE, STANDBY/CUE or STOP (Keyboard) button.

NOTE:

The auto track increment function and Auto Level Rec start function may not work when recording analog signals containing much noise. In this case lower the detection level to for example –54 dB.

21