Denon DN-M991R operating instructions Playing Programs

ENGLISH

Inserting a track in the program.

Select the position at which to insert a track.

Turn the select knob.

5-1	To insert a track at the third step
	in the program:

Lit

	Set the program insert mode.
	Press the SEARCH 7button.
5-2
	The step number flashes
	Perform the same operations as in steps 4-1 and 4-2 to
	select the track to be inserted.
5-3	To insert more tracks in the program, repeat steps 5-1,
	5-2, and 5-3.
	(To exit the program insert mode, press the PROGRAM IN
	button.)
	Deleting tracks from the program
	Select the step to be deleted.
	Turn the select knob.
6-1	To delete the track at the third step:

Lit

Delete that track from the program.

Press the SEARCH 6button.

Number of track at the next step in the program:

6-2

The next step number lights

To continue deleting tracks from the program, repeat steps 6-1and 6-2.

Exit the program editing mode.

Press the PROGRAM IN button.

7

Lit

(3) Playing Programs

Set the program play mode.

Press PROGRAM ON/OFF button.

Lit

1

Flashing	Lit
Lit	Number of
	next step

The first track in the program is cued and the standby mode is set.

Start programmed playback.

Press the PLAY/PAUSE button.

PLAY/PAUSE PLAY/PAUSE STANDBY/CUE

2

LitOff

Programmed playback starts.

•When the cartridge is ejected, the set program is cleared.

•If a track that is not in the program is selected with a serial command during programmed playback, that command is ignored.

NOTE:

Programs cannot be input when no disc is loaded.

27