Hotpoint FDF 784 manual Electrical Connection, ‘E’ or, ‘N’, ‘L’

Page 3

The dishwasher meets the requirements set out by the regulations in force concerning safety and electrical equipment.

Any technical checks should be conducted exclusively by a trained and authorised technician: Repairs carried out by unaithorised persons will invalidate the guarantee, as well as posing a potential hazard to the user.

The manufacturer declines all responsibility for damage to persons or property resulting from failure to observe the above precautions, from tampering with even a single component or from the use of non-original spare parts.

Electrical Connection

Before inserting the plug into the electrical socket, make sure that:

the socket is earthed and complies with current regulations;

the socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see Description of the appliance);

the power supply voltage falls within the values indicated on the data plate on the inside of the door;

the socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.

The cable should not be bent or compressed.

If the power supply cable is damaged, it must be replaced by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See Assistance)

This appliance must be earthed.

Fuses:your appliance comes fitted with a plug and a 13A fuse. If you need to replace the fuse, only those rated at 13A and ASTA approved to BS1362 should be used. If you lose the fuse cover, a replacement may be obtained from your local authorised Service Centre or Electrical company. Correct replacement is identified by colour coding or the marking on base of plug.

DO NOT use the plug unless the fuse cover is

fitted.

EN

 

Changing the Plug

Cut off and dispose of the supplied plug if it does not fit your socket.

To avoid a shock hazard DO NOT insert the discarded plug into a socket anywhere else.

Wires in the mains lead are coloured accordance with the following code:

Green/Yellow -

Earth

Blue

-

Neutral

Brown

-

Live

If you change the plug, the colour of the wires in the mains lead may not correspond with the terminal markings in the plug, which if not coloured, could be:

EARTH

‘E’ or

NEUTRAL

‘N’

LIVE

‘L’

Changing the Mains Lead

A lead can be ordered from Hotpoint Service

UK: 08709 066 066 or

Republic of Ireland: 1850 302 220

-If you have damaged the existing lead or require a longer one a charge will be made. It is strongly advised that this work is carried out by a qualified electrician.

-If the domestic wiring includes a residual current- operated circuit breaker, ensure that it conforms to the latest regulations.

The dishwasher must not be connected to the electricity supply while installation is being carried out.

-This appliance should only be connected to a 230/ 240V AC source, via a properly installed earthed socket.

-Use the dishwasher solely in a domestic environment.

-DO NOT stand or place heavy objects on the door when it is open, this could damage the door or cause the appliance to tip forward.

The Company shall not be held responsible for any incidents that occur if these regulations are not observed.

3

Image 3
Contents Instruction booklet Only available in selected models InstallationAdvice regarding the first wash cycle Positioning and levelling‘L’ Electrical Connection‘E’ or ‘N’Connecting the water supplies Sink Waste System Description of the appliance Overall viewControl panel Upper rack Loading the racksLower rack Cutlery basketWash options Start-up and useStarting the dishwasher Measuring out the detergentMulti-functional tablets Tabs Half load using the upper rackDelayed start Extra dryingDishwasher, reduce the amount of detergent used accordingly Wash cyclesMeasuring out the rinse aid Adjusting the amount of rinse aidSetting the water hardness Rinse aid and refined saltCare and maintenance Saving energy and respecting the environment Precautions and adviceGeneral safety Disposal of old electrical appliancesRecycling & Disposal Information Malfunction Possible causes / Solutions TroubleshootingAppliance Registration After Sales ServiceParts and Accessories Essential Contact InformationGuarantee terms and conditions GuaranteePage Page 195076649.00

FDF 784 specifications

The Hotpoint FDF 784 is a sophisticated and efficient dishwasher designed to meet the demands of modern kitchens. With its stylish appearance and abundance of innovative features, this appliance stands out as a reliable choice for households seeking cleanliness and convenience.

One of the key features of the Hotpoint FDF 784 is its energy efficiency. It operates with an impressive energy rating, allowing users to save on their energy bills while protecting the environment. This appliance uses advanced washing technologies, incorporating an Eco mode that optimizes water usage and energy consumption, making it an eco-friendly option for conscientious consumers.

The FDF 784 also boasts a generous capacity, accommodating up to 14 place settings. This is ideal for families and those who frequently entertain guests, ensuring that there's ample space to tackle even the largest loads. The interior is thoughtfully designed, with adjustable racks and a flexible layout that can be customized to fit various dish sizes and shapes. This versatility ensures that every item, from delicate glassware to bulky pots and pans, can be washed effectively.

In terms of cleaning performance, the Hotpoint FDF 784 does not disappoint. It features several wash programs, including a powerful intensive cycle for heavily soiled items and a quick wash option that gets dishes clean in under 30 minutes. The appliance is equipped with a sensor technology that detects soil levels and adjusts the wash cycle accordingly, ensuring optimal cleaning results while conserving water and energy.

The appliance also includes a unique AirDry technology that enhances the drying process. This innovative system uses the natural flow of air to improve drying efficiency and reduce water spots on dishes, ensuring they come out not only clean but also ready to be put away immediately.

Safety is paramount in any kitchen appliance, and the Hotpoint FDF 784 is no exception. It comes with a child lock feature that prevents accidental interruptions during wash cycles, providing peace of mind for families with young children.

Overall, the Hotpoint FDF 784 combines efficiency, flexibility, and innovative technologies to deliver a first-class dishwashing experience. Whether you're dealing with everyday dinnerware or post-party cleanup, this dishwasher proves itself as a valuable asset to any kitchen.