Svenska | Nederlands | Italiano | FrançaisSvenska | NederlandsEspañol | FrançaisDeutschItliano | DeutEspañolchDank | EnglishDansk |
SYSTEM SETUP
Positioning your system
Placing the power stand in the right location is an important part of setting up this product.
Determining the best location for your performance depends on several things.
•Size of staging area
•Number of performers
•Shared system (adding a T1 ToneMatchTM audio engine and multiple instruments) The following guidelines should get you started in setting up for a concert or show.
•Set up your system in the rear area of the performance stage.
•If possible, position your system behind the performer(s).
•If you are part of a group, avoid crowding together on stage. Allow some distance, ideally
Figure 3
Placement recommendations
Good
3 ft | 3 ft |
(0.9 m) | (0.9 m) |
3 ft | 3 ft |
(0.9 m) | (0.9 m) |
3ft
(0.9 m)
Better
5ft
(1.5 m)
5ft
(1.5 m)
5ft
(1.5 m)
5 ft | 5 ft |
(1.5 m) | (1.5 m) |
Best
8