Svenska | Nederlands | Italiano | FrançaisSvenska | NederlandsEspañol | FrançaisDeutschItliano | DeutEspañolchDank | EnglishDansk |
SYSTEM SETUP
Connecting to AC power
Figure 6
Power connections
1.Make sure the power switch is off.
2.Plug one end of the AC power cord into the AC Mains connector on the power stand.
3.Plug the other end into a live AC (mains) receptacle (Figure 6).
CAUTION: DO NOT block or cover the handle opening, which is part of the ventilation system. Doing so can cause the L1TM model II system to overheat, switch to a thermal protec- tion mode, and temporarily turn off.
Power switch
AC Mains
CAUTION: Bose recommends using a quality surge suppressor on all electronic equipment. Voltage variations and spikes can damage electronic components in any system. A quality suppressor, which can eliminate the vast majority of failures attributed to surges, may be pur- chased at electronics stores.
10