User Manual BDL4771V
HDMI with One Wire
One Wire uses the HDMI CEC (Consumer Electronics Control) industry standard protocol to share functionality between connected devices and the display. To transfer system commands, you need to use an HDMI cable to connect the display to a device equipped with HDMI CEC. Select On in this menu and you can operate the main functionalities on your display and the connected device with one remote control. For instructions on how to use the One Wire function, please refer to the One Wire DFU on the accompanying
CD ROM.
Notes:
•The One
•We do not guarantee 100% interoperability with all HDMI CEC devices.
Smart power
Set the display to reduce the power consumption automatically. Setting to High will bring the most power savings.
Use the UP/DOWN button to toggle between
• Off | • Medium |
•High
Auto signal detection
Select to let the unit detect and display available signal source automatically.
•On - Set the unit to display the image automatically once a signal is connected.
•Off - Once a signal is connected, it can only be selected manually.
Use the UP/DOWN button to make selection.
Settings cloning
Select Monitor to USB or USB to Monitor to transfer all the OSD settings between the display and a USB flash drive.
Advanced option reset
Reset all settings in the Advanced option menu.
Press the PLUS button to open the submenu, and then press PLUS/MINUS to make selection. Select Reset and press the SET button to restore settings to factory preset values. Press the EXIT button to cancel and return to the previous menu.
