Denon DN-C550R operating instructions Normal Playback

4. Fade-in and fade-out recording

★It is possible to record by gradually increasing the volume (fade-in) or decreasing it (fade-out).

(1) Fade-in recording

✽Also refer to “Setup Method (5) Fade-in time setting” (Page 11).

1	Perform the procedure at “Manual recording” step 1 to 8 (Page 16).
2	Start playing the selection you want to record on the CD player, cassette deck, etc.
3	Press the fader button on the remote control unit.
	•	“Fade In” is displayed, and “FADE” flashes during the fade in operation.
	•	The recorded sound is gradually increased from a recording level of – ∞ to the set recording level in the set time.

ENGLISH

11NORMAL PLAYBACK

1.Starting playback

First try playing the tracks in order.

Select the deck to be operated.

(Remote control unit)

CD CD-R

_ DUBBING _ RELAY

NORMAL HIGH MODE

(2) Fade-out recording

✽Also refer to “Setup Method (6) Fade-out time setting” (Page 11).

1	During recording, press the fader button on the remote control unit.
	•	“Fade Out” is displayed, and “FADE” flashes during the fade out operation.
	•	The recorded sound is gradually decreased from the set recording level to a recording level of -– ∞ in the set time.

NOTE:

• The fade in/out recording function does not work in the synchro or copy recording modes. Record manually if you want to

(Main unit)

1

1

PROFESSIONAL CD RECORDER DN-C550R

DUBBING

DISPLAY TITLE /

8

9

NORMAL

HIGH

TIME

SELECT CHARACTER

TIME

CLEAR

INPUT

FINALIZE

4REC

8

9

REMOTE SENSOR

PLAY

STOP

PAUSE

POWER

PHONES

PHONES LEVEL

MULTI JOG

RELAY MODE

OPEN / CLOSE

ON

OFF

OPEN /CLOSE

MENU

PLAY

STOP

PAUSE

-

+

1

2

3

5

5

1

2

3

MIN

MAX

PUSH

ENTER

2

3

1

1

2

3

A	!	"	D # %		G & '
	1		2		3
J	(	)	M ✽ +		P , –
	4		5		6
S .			V :	;	Y < >
	7		8		9
[	=	]	{ ?	}	CLEAR
10			+10

REC

67

MENU

	8	ENTER	9
3	STOP	PLAY	PAUSE
	2		3	2
	PROG/DIRECT	CALL 1 / ALL	A - B

use the fade in/out function.

RANDOM TIME	TITLE CHARACTER
DISPLAY SEL . FADER INPUT		FINALIZE

1	Load the disc to be played.
	• Press the PLAY button (1) to start CD play.

2	• “1”lights up and the track number and track time of the track in play appear on the display.
	• Press the TIME button once, twice or three times to see:
	Remaining track time, total remaining time, elapsed track time.

NOTE:
•	“No	Disc” will be displayed at such times as when a disc is not loaded, the disc cannot be read properly due to
	scratches or dirt, or the disc is loaded upside down.
2. Stopping playback
3	Press the stop button (2 STOP).
	•	Playback stops.

•The stop mode is set automatically once all the tracks on the disc have been played.

19