Hotpoint OS 897D C HP, OS 897D HP, OS 897D C IX Electrical connection, Appliance Specifications

Page 3

Electrical connection

￿Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

Fitting the power supply cable

• The socket can withstand the maximum power of

the appliance, which is indicated on the data

GB

 

plate (see below).

 

The voltage is in the range between the values

 

indicated on the data plate (see below).

The socket is compatible with the plug of the

 

appliance. If the socket is incompatible with the

L

N

1.Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

2.Install the power supply cable by loosening the cable clamp screw and the three wire contact screws L-N- . Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire to the terminal

plug, ask an authorised technician to replace it.

Do not use extension cords or multiple sockets.

￿Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

￿The cable must not be bent or compressed.

￿The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

￿The manufacturer declines any liability should these safety measures not be observed.

APPLIANCE SPECIFICATIONS

ExtraLarge

width 43.4 cm

Space

height 39.5 cm

dimensions

depth 40.8 cm

ExtraLarge

70 l

Space volume

 

 

Directive 2002/40/EC on the label of

 

electric ovens.

marked (see diagram).

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Connecting the electricity supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate (see table).

The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

￿The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

The appliance is earthed and the plug is compliant with the law.

ExtraLarge

Standard EN 50304

Space

 

ENERGY

Declared energy consumption for

LABEL

Forced convection Class – heating

 

mode:

 

Gratin.

Main Space

width 43.4 cm

height 27 cm

dimensions

depth 40.8 cm

 

Main Space

48 l

volume

 

 

Directive 2002/40/EC on the label of

 

electric ovens.

Main Space

Standard EN 50304

 

ENERGY

Declared energy consumption for

LABEL

Forced convection Class – heating

 

 

mode:

 

Universal.

Electrical

voltage: 220 - 240 V~ 50 Hz maximum

power absorbed 2600 W (see data

connections

plate)

 

 

This appliance conforms to the

 

following European Economic

 

Community directives: 2006/95/EEC

 

dated 12/12/06 (Low Voltage) and

 

subsequent amendments -

 

89/336/EEC dated 03/05/89

 

(Electromagnetic Compatibility) and

 

subsequent amendments - 93/68/EEC

 

dated 22/07/93 and subsequent

 

amendments. 2002/96/EEC

3

Image 3
Contents Oven Operating InstructionsPositioning InstallationElectrical connection Appliance SpecificationsDisplay Description of the applianceOverall view Control panelDripping PAN Oven structureExtraLarge Space Setting the clockSetting the timer Start-up and usePage Starting the oven Small SpaceMain Space Using the Small Space and Main Space at Same timeProgramming cooking Practical cooking adviceAutomatic Cooking advice table for the Small Space feature Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCleaning the oven door Care and maintenanceSwitching the appliance off Cleaning the applianceAfter Sales Service GBGuarantee

OS 897D C HP, OS 897D IX, OS 897D C IX, OS 897D HP specifications

The Hotpoint OS 897D series, including models HP, C IX, IX, and C HP, represents a line of high-performance built-in ovens designed to enhance the cooking experience in modern kitchens. Each model combines innovative technologies and user-friendly features, ensuring a versatile and efficient cooking environment.

One of the standout features of the OS 897D series is the advanced cooking technology. Equipped with Multi-Flow Technology, these ovens maintain a consistent temperature throughout the cavity, allowing for even cooking and optimal baking results. This technology is particularly beneficial for bakers and those who enjoy roasting, as it ensures that every dish is cooked uniformly.

The OS 897D series also offers a variety of cooking modes, making it a versatile choice for any culinary task. With options like conventional, fan-assisted, grill, and pizza settings, users can easily adapt the oven to suit their specific recipe requirements. This flexibility is complemented by the dedicated Pizza function, which provides the perfect temperature for achieving crispy bases and perfectly melted toppings.

In terms of design, the OS 897D models boast a sleek and modern aesthetic. With a stainless steel finish and elegantly designed controls, these ovens not only perform exceptionally well but also add a touch of sophistication to any kitchen decor. The large glass viewing window allows users to monitor the cooking progress without opening the door, conserving energy and maintaining a stable temperature inside.

Energy efficiency is another key characteristic of the OS 897D series. These ovens are designed with a focus on reducing energy consumption, making them an environmentally friendly option in addition to their cooking prowess. Features such as programmable timers and automatic shut-off enhance convenience and safety for busy households.

The interior of the ovens is designed for easy cleaning, with catalytic liners that break down food residues during cooking, minimizing the need for manual scrubbing. Additionally, the removable side racks simplify access and maintenance.

In summary, the Hotpoint OS 897D HP, OS 897D C IX, OS 897D IX, and OS 897D C HP are exceptional built-in ovens that combine cutting-edge technology, flexible cooking options, energy efficiency, and stylish design. These features make them an excellent choice for both amateur cooks and culinary enthusiasts alike, elevating the kitchen experience to new heights.