Hotpoint OS 897D P IX/HP, OS 897D P/HP manual Electrical connection

Page 3

Electrical connection

!Ovens equipped with a three-pole power supply cable are designed to operate with alternating current at the voltage and frequency indicated on the data plate located on the appliance (see below).

Fitting the power supply cable

• The socket can withstand the maximum power of

the appliance, which is indicated on the data

GB

 

plate (see below).

 

•

The voltage is in the range between the values

 

indicated on the data plate (see below).

•

The socket is compatible with the plug of the

 

appliance. If the socket is incompatible with the

L

N

1.Open the terminal board by inserting a screwdriver into the side tabs of the cover. Use the screwdriver as a lever by pushing it down to open the cover (see diagram).

2.Install the power supply cable by loosening the cable clamp screw and the three wire contact screws L-N- . Connect the wires to the corresponding terminals: the Blue wire to the terminal marked (N), the Brown wire to the terminal marked (L) and the Yellow/Green wire to the terminal

plug, ask an authorised technician to replace it.

Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

marked (see diagram).

3.Secure the cable by fastening the clamp screw.

4.Close the cover of the terminal board.

Connecting the electricity supply cable to the mains

Install a standardised plug corresponding to the load indicated on the data plate (see table).

The appliance must be directly connected to the mains using an omnipolar switch with a minimum contact opening of 3 mm installed between the appliance and the mains. The switch must be suitable for the charge indicated and must comply with current electrical regulations (the earthing wire must not be interrupted by the switch). The supply cable must be positioned so that it does not come into contact with temperatures higher than 50°C at any point.

!The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations.

Before connecting the appliance to the power supply, make sure that:

•The appliance is earthed and the plug is compliant with the law.

APPLIANCE SPECIFICATIONS

Dimensions

width 43.4 cm

height 39.5 cm

 

depth 40.8 cm

Volume

70 l

Electrical

voltage: 230 - 240 V~ 50Hz

maximum power absorbed

connections

3400-3600W (see data plate)

 

 

Directive 2002/40/EC on the

 

label of electric ovens.

ENERGY

Standard EN 50304

Declared energy consumption

LABEL

for Forced convection Class –

 

 

heating mode:

 

Gratin.

 

This appliance conforms to the

 

following European Economic

 

Community directives:

 

2006/95/EEC dated 12/12/06

 

(Low Voltage) and subsequent

 

amendments – 2004/108/EEC

 

dated 15/12/04

 

(Electromagnetic Compatibility)

 

and subsequent amendments -

 

93/68/EEC dated 22/07/93 and

 

subsequent amendments.

 

2002/96/EEC and subsequent

 

amendments.

 

1275/2008 Stand-by/off mode

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Oven Operating InstructionsVentilation InstallationPositioning Built-in applianceElectrical connection Display Description of the applianceOverall view Control panelOven structure ExtraLarge Space Setting the clockSetting the timer Start-up and useMultilevel function LOW Temperature functionFast Clean mode Universal cooking functionsSmall Space Recipe for PizzaRecipe for Bread maximum amount of dough Ingredients Fast Cooking function Using the Small Space and Main Space at the same timeMain Space Cooking functionsProgramming the cooking duration Practical cooking adviceSetting the end time for a cooking mode Programming cookingGrill Rack Cooking advice table for the Small Space feature Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCleaning the oven door Care and maintenanceSwitching the appliance off Cleaning the applianceOnce the automatic cleaning cycle is over Automatic cleaning with the Fast GB Clean functionSafety devices Programming the automatic cleaning end timePage Page Free Helpdesk Service Months Parts and Labour GuaranteeYear Parts Guarantee Extended GuaranteesHotpoint Service Parts and AccessoriesAppliance Registration

OS 897D P IX/HP, OS 897D P/HP specifications

The Hotpoint OS 897D P/HP and OS 897D P IX/HP are innovative and highly efficient built-in ovens designed to meet the diverse cooking needs of modern households. These models are renowned for their sleek design, advanced technology, and user-friendly features that enhance the cooking experience.

One of the standout features of the Hotpoint OS 897D P/HP and OS 897D P IX/HP is their multifunctional cooking capabilities. With multiple cooking modes, including fan-assisted cooking, conventional baking, and grilling, these ovens allow users to prepare a wide variety of dishes with ease. The fan-assisted mode ensures even heat distribution, making it ideal for baking pastries or roasting meats to perfection.

The precise temperature control offered by these ovens is another highlight. Equipped with advanced thermoregulation technology, the Hotpoint OS 897D ensures that the interior temperature remains stable throughout the cooking process. This feature not only improves cooking efficiency but also enhances the quality of food prepared.

Energy efficiency is a key consideration in today's appliances, and both the OS 897D P/HP and OS 897D P IX/HP excel in this regard. They are designed to minimize energy consumption while maintaining high performance, aligning with sustainable practices and reducing utility costs for consumers.

Cleaning these ovens is made simple and hassle-free thanks to the innovative Hydro Easy Clean system. This technology uses steam to loosen stubborn stains and grease, allowing for easy wiping after cooking. The enamel interior also prevents dirt buildup, making maintenance a breeze.

Aesthetic appeal is not compromised in the design of these ovens. The OS 897D P IX/HP version features a sleek stainless-steel finish that adds a modern touch to any kitchen decor. The intuitive control panel, with a clear display, simplifies operation and allows for precise adjustment of settings.

Safety is also prioritized in the design of Hotpoint ovens. Both models come equipped with features such as child lock and a cooling fan to ensure that the exterior remains safe to touch during and after cooking.

In summary, the Hotpoint OS 897D P/HP and OS 897D P IX/HP stand out as versatile, energy-efficient ovens with a plethora of cooking functions, easy maintenance, and a stylish design. They are ideal choices for any home chef looking to elevate their culinary experience.
Top Page Image Contents