Hotpoint 62DGW Levelling, Conversion for USE on Butane, G30 or Propane G31, Stability Chain

Page 6

Installation

 

LEVELLING

GB

Four skid feet are fitted which can be adjusted up or

 

 

down to level the cooker.

 

 

CONVERSION FOR USE ON BUTANE

 

(G30) OR PROPANE (G31)

 

Each burner requires the injector to be replaced and

 

bypass screws adjusted or replaced as follows:

1.Remove the loose hotplate burner parts.

2.Using a 7mm socket, replace the hotplate injectors as appropriate (see table on previous page).

3.Re-position the loose burner parts.

4.Remove the enamelled baffle at the front of the grill (2 screws).

5.Remove the screw on the right hand side of the burner and gently slide the burner off the injector.

6.Using a 7mm socket, replace the grill injector as appropriate (see table on previous page).

7.Re-assemble the burner and baffle.

8.Inside the top oven, remove the central screw securing the burner retainer. Slide the retainer to the right slightly and lift away.

9.Lift the burner assembly and place on the floor of

the oven to the right of the burner opening. 10.Using a 7mm socket, replace the oven injector as

appropriate (see table on previous page). 11.Re-assemble the oven burner and retainer. 12.Replace the main oven injector following the same

procedure as for the top oven.

13.Carefully pull off the control knobs and timer buttons.

14.Remove the 2 screws securing the underside of the control panel. Slide the control panel to the left slightly to remove.

15.Remove the 6 screws securing the timer mounting panel. Without completely removing it, manoeuvre the timer mounting panel to gain access to the thermostat bypass screws.

16.Using a narrow flat bladed screwdriver rotate the bypass screws fully clockwise. The main oven thermostat bypass screw is located on the body of the thermostat below the spindle, the top oven thermostat bypass screw is located on the body of the thermostat to the right of the spindle and the hotplate tap bypass screws are located down the centre of the spindle.

17.Re-assemble the control panel parts ensuring that when the connections are made to the ignition switch, the wires are above the switch rather than below.

18.Secure the self-adhesive LPG conversion label over the gas details on the data badge.

STABILITY CHAIN

A hole in the gas inlet valve bracket can be used to engage a stability chain.

CONNECTING TO GAS SUPPLY

670

300

Connection to the cooker should be made with an approved appliance flexible connection to BS 669. A length of 0.9 to 1.25m is recommended. The length of hose chosen should be such that when the cooker is in situ, the hose does not touch the floor.

Those cookers converted to use on LPG should be connected with a hose suitable for LPG and capable of withstanding a pressure of 50 mbar.

An adaptor backplate should be fitted within the shaded area shown, to allow the cooker to be pushed fully to the wall and to ensure that the flexible hose is only likely to come into contact with areas at the rear of the cooker that do not exceed a temperature rise of 70°C.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Contents Operating InstructionsIntroduction Never For your SafetyAlways AlwaysModel Numbers HAG InstallationGAS Safety Installation & USE Regulations Adapting to different types of gas main and top ovenProvision for Ventilation Technical DataLocation Space for FixingConversion for USE on Butane Connecting to GAS SupplyLevelling G30 or Propane G31If a Moulded Plug is Fitted Electrical ConnectionIf the Fitted Plug is Removed Qualified electricianInstallation and Operational Checks Features Electronic Ignition for the Gas Hob Control PanelControl Knobs for the gas burners Main Oven ControlSetting the clock Setting the minute minderProgramming cooking Models with Hob Gas Burner Safety Devices to Prevent Leaks Safety Requirements for Deep FAT FryingHOW to Deal with a FAT Fire HotplateGrill To USE the GrillRelighting the Burner Main Oven Main Oven Cooking Chart FishYeast Mixtures Slow Cook Setting Using the Slow Cook Setting for Slow CookingTo USE the TOP Oven Guidance on Using the TOP OvenTop Oven Relighting the BurnerTop Oven Cooking Chart Bread rolls, plait Mins Tea breads etc Care and Cleaning Stay Clean PanelCooker Finish Cleaning Method Side Opening DoorsBurner Maintanance Instructions Main OvenTOP OVEN/GRILL Something Wrong with your Cooker Disposal of your product Disposal of old electrical appliancesGuarantee does not cover Months Parts and Labour GuaranteeGuarantee is subject to the following conditions Year Parts GuaranteeHotpoint Service Parts & AccessoriesUK 08448 24 24 Republic of Ireland 01 230 Xerox Fabriano
Related manuals
Manual 28 pages 11.85 Kb Manual 28 pages 11.41 Kb

62DGW specifications

The Hotpoint 62DGW is a high-performance double oven cooker designed to meet the demands of modern kitchens while providing exceptional cooking versatility. With its sleek design and innovative features, this appliance is a popular choice among home cooks and culinary enthusiasts alike.

One of the standout features of the Hotpoint 62DGW is its dual fuel cooking system. This means it combines the precision of gas cooking on the hob with the even heat distribution provided by electric ovens. The hob is equipped with four burners, each delivering varying levels of heat intensity to accommodate different cooking styles. From rapid boiling to simmering sauces, the flexibility the burners offer is a significant advantage in the kitchen.

The double oven configuration is another key element of the Hotpoint 62DGW. With a main oven capacity of 62 liters and a secondary oven capacity of 33 liters, it provides ample space for multi-course meals or large gatherings. The main oven features a fan-assisted design, ensuring that heat circulates evenly, resulting in perfectly cooked dishes every time. This is ideal for baking, where consistency is crucial.

This cooker also incorporates a range of modern technologies aimed at enhancing efficiency and cooking performance. One of the notable technologies is the defrost function, which allows users to safely thaw food within the oven. Additionally, the Hotpoint 62DGW includes a grill function offering another cooking method for creating deliciously crispy dishes.

The easy-to-clean enamel interior is another practical feature of this model. It minimizes food residue buildup, making maintenance straightforward and reducing the time spent on cleaning. Furthermore, the appliance is built with safety in mind, featuring a flame failure device that automatically cuts off the gas supply if the flame goes out, providing peace of mind during cooking.

Aesthetically, the Hotpoint 62DGW features a striking white finish combined with chrome accents, which adds a contemporary touch to any kitchen decor. Its control knobs and LED display are intuitively designed, allowing for straightforward operation, making it accessible to cooks of all skill levels.

With its combination of advanced cooking technologies, abundant capacity, and user-friendly features, the Hotpoint 62DGW is an ideal choice for anyone looking to enhance their culinary capabilities while enjoying the benefits of a stylish and efficient kitchen appliance.
Top Page Image Contents