Hotpoint SX 1046Q PX, SX1046L PX Demo mode, Restoring the factory settings, Standby

Page 7

!Once cooking has been completed, the cooling fan continues to operate until the oven has cooled down sufficiently.

Oven light

The light comes on when the oven door is opened or when a cooking mode starts (if enabled in the settings menu).

When models featuring LED INSIDE technology begin cooking, the LEDs on the door light up for improved illumination of all cooking levels.

Residual heat indicators

The appliance is fitted with a residual heat indicator. When the oven is off, the “residual heat” bar on the display lights up to indicate high temperatures inside the oven cavity. The individual segments of the bar switch off one by one as the temperature inside the oven falls.

Demo mode

!The appliance will not enter DEMO mode if the language has not been selected beforehand.

The oven can operate in DEMO mode: all heating elements are deactivated, and the controls remain operative.

To activate DEMO mode, switch off the oven and keep the control dial turned clockwise while pressing

for 10 seconds. A buzzer sounds and the display shows “DEMO”.

To deactivate DEMO mode, keep the control dial

turned anticlockwise while pressing for 3 seconds. A buzzer sounds to confirm deactivation.

Restoring the factory settings

The oven factory settings can be restored to reset all

GB

selections made by the user (language, tone,

 

 

customised durations, etc…). To carry out a reset,

 

switch off the oven, then press and hold 6

,

 

and

simultaneously for 6 seconds. Once the

 

restore procedure is complete, a buzzer will sound.

The first time the icon is pressed, the oven will behave as if it is being switched on for the first time.

Standby

This product complies with the requirements of the latest European Directive on the limitation of power consumption in standby mode. If no buttons are pressed for 30 minutes and the control panel/door lock has not been activated, the appliance automatically reverts to standby mode. The ECO Mode symbol appears on the display to indicate standby mode. As soon as interaction with the machine resumes, system operation is restored.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

7

Image 7
Contents Operating Instructions Positioning InstallationN L Overall view Display in programming modeDisplay in cooking mode Description of the applianceStart-up and use Switching the oven on for the first timeSetings menu commands Setting the clockStarting the oven Setting the minute minderRestoring the factory settings Demo modeStandby Manual cooking modes ModesAutomatic cooking modes ECO modeWater into the baking tray in position Page Programming cooking Practical cooking adviceMultilevel Cooking advice tableModes Foods Weight Rack position Preheating Standard Respecting and conserving the environment Precautions and tipsGeneral safety DisposalCare and maintenance Automatic cleaning by Pyrolysis Page Problem Possible cause Solution TroubleshootingParts and Accessories Hotpoint ServiceAppliance Registration Free Helpdesk Service Months Parts and Labour GuaranteeYear Parts Guarantee Extended GuaranteesPage Page Xerox Fabriano