Using your MultiChopper™ Food Chopper
Wash the processing bowl and blades in warm soapy water. Rinse well and dry thoroughly.
Using the double blade attachment
1.Place the
2.Place the lower blade over the shroud in the centre of the processing bowl.
See Figure 1.
NOTE: Whether the upper blade is used will depend on the chopping task.
4.Place the food items to be chopped inside the processing bowl. Large portions should be cut into small pieces before chopping, approximately 3cm cubes.
NOTE: Do not operate the appliance when the processing bowl is empty.
5.Place the processing bowl cover on top of the processing bowl and rotate clockwise until the two parts are interlocked.
Figure 1
3.Position the upper blade on top of the lower blade. See Figure 2.
Figure 3
6.Place the motor housing on top of the processing bowl cover. See Figure 3.
7.Hold down the motor housing with one hand and press down on the power button with the other hand to activate the chopper. Use short pulses until the right consistency is achieved.
Figure 2
4