Delta 34-814, 36-812 Assembling GPE ON/OFF Switch, Assembling Blade Guard and Splitter Assembly

Page 9

F

D

A

Fig. 11

ASSEMBLING GPE ON/OFF SWITCH

1.The GPE on/off switch (A) Fig. 11, is shipped attached to a mounting bracket at the right side of the machine.

2.Loosely assemble switch and switch bracket (A) Fig. 12, to the inside front lip of extension table with 5/16- 18x1" flat head screw (D), 5/16" flat washer (E), and 5/16 hex nut (F) through hole (G).

3.Attach the side of switch bracket (A) Fig. 13, to the inside of extension table at the front of the saw using the 7/16-20x1-1/4" screw (C) and 7/16" flat washer. Tighten screws (C) and (D).

ASSEMBLING BLADE GUARD AND SPLITTER ASSEMBLY

CAUTION: DISCONNECT MACHINE FROM POWER SOURCE.

1.Remove the table insert Fig. 14. Raise the saw arbor, by turning the locking handle on the front of the saw, counter clockwise and then turn the wheel on the front of the saw clockwise as far as it will go, and remove the saw blade from the machine by following the instructions in section “CHANGING THE SAW BLADE”.

2.The inside splitter mounting bracket (A) Fig. 15, is assembled to the inside of the saw and aligned with the inside blade flange (B) at the factory.

3.To check the alignment, remove screw and fastener plate (C) Fig. 15. Using a straight edge (D) Fig. 16, check to see if the splitter bracket (A) is aligned with the inside blade flange (B). Check both the top and bottom of bracket (A) with the top and bottom of flange (B).

EG

A

Fig. 12

D

C

A

Fig. 13

Fig. 14

C

A

B

Fig. 15

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Unisaw 10 Right Tilting Arbor Saw General Safety Rules Refer to them often Use them to instruct others Additional Safety Rules for Circular SawsPower Connections Motor SpecificationsGrounding Instructions Three Phase Operation Five Horsepower MotorsMagnetic Push Button Controls Extension CordsOperating Instructions Unpacking and CleaningAssembly Instructions Assembling Blade Tilting Mechanism HandleAssembling Extension Wing Assembling LVC Starter BOX to Cabinet Assembling LVC ON/OFF SwitchAssembling Blade Guard and Splitter Assembly Assembling GPE ON/OFF SwitchAdjust splitter bracket a until it is aligned Page Fastening Motor Cord to SAW Frame Attaching Motor CoverMiter Gage Holder and Wrench Holder Assembling RIP Fence Holder BracketsAssembling Dust Chute Adapter Starting and Stopping the SAW Operating Controls Unisaw AdjustmentsAdjusting Table Adjusting 90 and 45 Degree Positive StopsMiter Gage Operation and Adjustment Adjusting Table InsertMaintenance Replacing Belts and Adjusting Belt TensionChanging the SAW Blade Operations Protecting Cast Iron Table from RustCROSS-CUTTING Ripping Using the Fence AS a CUT-OFF GageUsing Auxiliary Wood Facing on Biesemeyer RIP Fence Using Auxiliary Wood Facing on the UnifenceUsing Accessory Moulding Cutterhead Always Install Blade Guard After Operation is Compete Using Accessory Dado Head Constructing a Featherboard Constructing a Push Stick PushstickDeluxe Uniguard Blade Guard Blade Guard AccessoriesAccessories PARTS, Service or Warranty Assistance Page Canadian PORTER-CABLE Delta Service Centers
Related manuals
Manual 28 pages 27.85 Kb

34-801, 34-806, 34-814, 36-812 specifications

Delta has long been a reputable name in the woodworking industry, and its line of table saws, including models such as the Delta 36-812, 34-814, 34-806, and 34-801, exemplifies the brand's commitment to quality and innovation. Each of these models offers unique features and technologies tailored to meet the needs of both professional woodworkers and hobbyists.

The Delta 36-812 is a compact yet powerful table saw designed for versatility and efficiency. This model features a 15-amp motor, capable of delivering 4,800 RPM, providing sufficient power for cutting through various materials including hardwood and softwood. One of the standout features of the 36-812 is its Portable Stand, which allows easy transportation and setup without compromising stability. The saw also boasts a large, adjustable rip fence, ensuring accuracy when making long cuts.

Next in line is the Delta 34-814, which takes things up a notch with its more advanced design. This cabinet saw is built with a one-piece, rigid steel frame that minimizes vibrations, contributing to cleaner cuts. The 34-814 also features a 1.5 HP motor, providing reliable power and performance in any workshop setting. Its patented Quick-Build T-Square System offers smooth adjustments for crosscuts and rip cuts, enhancing user convenience, while the large table surface provides plenty of workspace for larger projects.

For those looking for a reliable saw that combines performance with compactness, the Delta 34-806 makes a strong case. This model is equipped with a 1 HP motor and features a sturdy, lightweight construction which makes it ideal for smaller workshops or job sites. It boasts a patented fence system that is easy to use and adjust, along with a durable blade guard for enhanced safety. The compact design does not sacrifice cutting power, allowing woodworkers to tackle a variety of materials with ease.

Lastly, the Delta 34-801 is a classic contractor saw that captures the essence of performance and portability. It features a powerful 1.5 HP motor and a 30-inch rip capacity, perfect for larger woods and panels. The saw includes an easy-to-use rack and pinion fence system that improves accuracy and alignment. Its folding stand allows for effortless storage, making it a great option for those who need to maximize space.

In summary, the Delta 36-812, 34-814, 34-806, and 34-801 are all exemplary offerings in Delta's lineup, each designed with specific features and capabilities. From compact options to more robust cabinet designs, these saws cater to the diverse needs of woodworkers across various skill levels and applications. With their combination of power, precision, and innovative technologies, they continue to uphold Delta's legacy of excellence in woodworking tools.
Top Page Image Contents