Hamilton Beach Immersion Mixer Troubleshooting Guide, Accessories, Problem Solution

Page 7

Special Operating and Cleaning Instructions for Institutional Use

Preparing Infant Formulas and Similar

Special Cleaning Instructions for

Nutritional Adult Products

Hospital and Institutional Use

Refer to the instructions for installing and mixing with

To ensure that the mixer and blades remain sanitary,

the cutting blades. Be sure that the mixer and any

follow the special cleaning instructions below.

containers have been properly cleaned and sanitized

1. Wash the cutter attachment with an approved

before using.

detergent after every use, including when

 

Follow the additional guidelines below:

changing formula types, as described in the

1. Always clean the cutter attachment thoroughly

section “General Cleaning with the Attachment

in Place” on page 6.

between different formula types to avoid cross

2. At least once per day, sanitize the cutter

contamination. The attachment should be

removed and washed with detergent, then rinsed

attachment per the “Sanitizing” instructions

thoroughly, before mixing a new type of product.

on page 6, or as required to meet local

2. Measure powder or liquid ingredients for the

sanitation codes.

3. After cleaning, attachments should be air dried

formula mixture. Add approximately half of the

final volume of water to the mixing container.

and stored in a closed container or wrapped to

3. Mix formula for 15–60 seconds on low power

protect them from contamination.

 

until all traces of powder have been incorporated

The cutter attachment may also be washed and

into the liquid, or until all liquid ingredients are

autoclaved by the hospital’s central processing

thoroughly blended.

department. Be sure to follow all required safety and

4. Add remaining water and blend 15–30 seconds

sanitation codes.

on low power.

 

NOTE: Some very difficult to blend powdered

 

formulas may require using a slightly longer

 

blending time or high power.

 

 

 

Troubleshooting Guide

Problem . . .

Solution . . .

Immersion mixer will

• Make sure the mixer is plugged in.

not turn on

• Check for a blown fuse.

 

 

 

Excessive noise

• Make sure that the blade assembly is properly installed.

or vibration

• Make sure that the blade does not contact the sides or bottom of the container.

 

Motor strains or stops

• Reduce the amount of product in the bowl. Mix thick products in smaller batches.

 

• Make sure ingredients are prepared properly for mixing.

 

• Reduce the amount of product.

Poor results

• Process for a longer or shorter period of time.

(See also Tips)

• Adjust the mixing speed.

 

 

 

Accessories

Part Number

Description

 

 

HMIA 200B

Detachable blade/shaft assembly

 

 

7

Image 7
Contents 840157800 Batidora de InmersiónImportant Safety Instructions Immersion Mixer SafetyPreparing for use Parts and FeaturesBefore Using for the First Time Electrical RequirementsTo install the cutting blades When to use the bladesNever submerse the vents on the motor housing Using the cutting bladesFor mixing and blending Autoclave Cleaning and Sanitizing InstructionsGeneral Cleaning with the Attachment in Place SanitizingPart Number Description Troubleshooting GuideAccessories Problem SolutionThis Warranty supercedes all other Product Warranties Product WarrantySécurité de votre mélangeur à immersion Préparation en vue d’une utilisation Pièces et caractéristiquesAvant d’utiliser pour la première fois Exigences électriquesQuand utiliser les lames Pour installer les lames coupantesLe sens des aiguilles Pour mélanger et broyer Utilisation des lames coupantesRisque de choc électrique ’utilisez jamais de rallonge Désinfection Nettoyage général avec l’accessoire en placeNettoyage hebdomadaire de l’accessoire Solution de désinfection recommandéePage Garantie limitée AccessoiresGarantie du produit En cas de panneSu seguridad y la de otros es sumamente importante Seguridad de la batidora de inmersiónPreparación para el uso Piezas y CaracterísticasAntes de usar por primera vez Requisitos eléctricosPara instalar las cuchillas de corte Cuándo usar las cuchillasPara mezclar y batir Cómo usar las cuchillas de corteSolución desinfectante recomendada Limpieza general con el accesorio en su lugarDesinfección Limpieza semanal del accesorioProblema Solución Guía de solución de problemasAccesorios Garantía del productoNúmero de parte Descripción Page Yadkin Road

Immersion Mixer specifications

The Hamilton Beach Immersion Mixer, commonly referred to as an immersion blender, is a versatile kitchen tool designed to make cooking and food preparation more efficient and enjoyable. This appliance stands out with its powerful motor and sleek design, combining functionality with user-friendly features.

One of the main features of the Hamilton Beach Immersion Mixer is its powerful motor, which offers a robust performance for various blending tasks. It typically boasts a range of speeds, allowing users to customize their blending experience depending on the task at hand, whether it's pureeing soup, whipping cream, or blending smoothies. The variable speed control is a significant advantage, giving cooks better precision over their blending.

The blending wand is another highlight, usually made from durable stainless steel which not only enhances performance but also ensures longevity. The design also allows for easy immersion into pots, bowls, and other containers, ensuring that users can blend directly in the cooking vessel and minimize cleanup time. This makes it particularly useful for tasks like pureeing hot soups directly in the pot, avoiding the need for transferring contents to a traditional blender.

The Hamilton Beach Immersion Mixer is designed with safety and convenience in mind. Many models come with a detachable blending shaft, making cleaning a breeze. The unit may also feature a non-slip grip, enhancing comfort and control while in use. Additionally, a majority of models include a container for chopping and a whisk attachment, adding to the versatility of the appliance. This means you can not only blend but also chop vegetables or whisk egg whites, eliminating the need for multiple tools.

Another characteristic that users appreciate is the lightweight design. This allows for effortless handling and maneuvering, especially when tackling larger batches of food. Moreover, the corded design typically provides consistent power without the need for battery changes, ensuring that the immersion mixer is always ready for use.

Overall, the Hamilton Beach Immersion Mixer combines innovative technologies and practical features to deliver a reliable and efficient blending experience. Its adaptability for a wide range of culinary tasks makes it a valuable addition to any kitchen, catering to both amateur cooks and seasoned chefs alike. With its durable construction and thoughtful design, this immersion blender is a kitchen companion that simplifies cooking processes and enhances culinary creativity.