Wells WPP-6, WPP-10 owner manual Cleaning Instructions, Preparation

Page 8

CLEANING INSTRUCTIONS

CAUTION:

ELECTRIC SHOCK

HAZARD

Disconnect unit from electric power before cleaning.

CAUTION:

BURN HAZARD

Allow unit to cool completely before cleaning.

IMPORTANT: DO NOT spill, splash or pour water into controls, kettle receptacle, heat lamp socket or wiring.

IMPORTANT: DO NOT use steel wool or abrasive cleansers for cleaning the cabinet.

PREPARATION

Turn ON/OFF switch “OFF

 

Allow unit to cool completely before cleaning

 

Disconnect unit from electric power before

 

cleaning

FREQUENCY

Daily, or as needed

TOOLS

Mild Detergent, Soft Cloth or Sponge

 

Plastic Scouring Pad

CLEANING

1.Disconnect unit from electric power and allow to cool completely before cleaning.

2.Shake all debris from kettle. Remove drop door. Scoop all product from cabinet and discard. Empty crumb tray.

3.Disconnect kettle plug from twist lock receptacle. Tilt kettle fully vertical and lift off of kettle hangers.

4.Wipe inside and outside of kettle with a sponge or soft cloth dampened with mild detergent. Rinse by wiping with a sponge or soft cloth dampened with clear water. Allow to air dry.

NOTE: Baked on deposits may be removed with a plastic scouring pad. DO NOT submerge kettle, kettle cord or kettle plug in water.

5.Disassemble stirrer, then slide kettle lid off of stirrer shaft. Wipe lid and stirrer components with a sponge or soft cloth dampened with mild detergent. Rinse by wiping with a sponge or soft cloth dampened with clear water. Allow to air dry.

6.Wipe inside and outside of cabinet, drop door and crumb tray with

asponge or soft cloth dampened with mild detergent. Rinse by wiping with a sponge or soft cloth dampened with clear water. Allow to air dry.

NOTES:

a.Use care when cleaning doors to prevent scratching.

b.Do not wipe heat lamp if it is hot.

c.Use care that no water is splashed into kettle receptacle or heat lamp socket.

7.Reinstall kettle lid. Reassemble stirrer, then reinstall kettle. Reinstall drop door, then slide crumb tray in place.

Procedure is complete.

232 306223 Owners Manual WPP-Series Popcorn Popper

6

Image 8
Contents Model WPP-6 Limited Warranty Statement Table of Contents SpecificationsIntroduction ApplicabilityFeatures & Operating Controls Precautions and General Information Agency Listing InformationShock Hazard Risk DamageUnpacking & Inspection InstallationSetup Operation PreparationPopping Popcorn Suggestions for USECleaning Instructions PreparationTroubleshooting Suggestions Problem Possible Cause Suggested RemedyMaintenance Instructions Adjust Stirrer Neutral PositionInjury Hazard Change Heat LampExploded Views Wiring Diagram Parts & Service SCOOP, Popcorn

WPP-10, WPP-6, WPP-10 specifications

The Wells WPP-6 and WPP-10 are sophisticated water purification systems designed for both domestic and industrial applications. Their primary objective is to provide clean, safe, and potable water, utilizing advanced technologies and efficient design.

Starting with the Wells WPP-6, this model is renowned for its compact design, making it an ideal choice for households and small businesses. It features a multi-stage filtration system that incorporates sediment filters, activated carbon filters, and reverse osmosis membranes. This tiered approach ensures that both larger particles and smaller contaminants are effectively removed from the water. The WPP-6 is equipped with a UV sterilization component that serves to eliminate biological contaminants, further ensuring water safety. Its energy-efficient operation and low maintenance requirements make the WPP-6 a popular choice among users seeking reliable water purification solutions.

On the other hand, the WPP-10 model scales up the capabilities of the WPP-6, targeting larger households or light commercial enterprises. With a higher water output, the WPP-10 utilizes similar multi-stage filtration technology but is designed for increased capacity. It features an enhanced reverse osmosis system that offers a higher recovery rate, thereby minimizing water waste—a critical attribute in today's environmentally conscious market. The WPP-10 is also equipped with smart monitoring systems that allow users to track water quality and filter status, providing real-time data to ensure optimal performance.

In terms of technological advancements, both models employ quick-connect fittings for easy installation and filter replacement. This user-friendly feature drastically reduces the time and effort required for maintenance, making them accessible for non-specialists. Additionally, these systems are typically constructed with food-grade materials, which enhances their durability and ensures that the water quality is not compromised by harmful substances.

In conclusion, the Wells WPP-6 and WPP-10 stand out in the realm of water purification systems, offering robust features and technologies that prioritize safety and efficiency. Their respective designs cater to various user needs, ensuring clean drinking water is accessible in both residential and light commercial settings. With their reliable operation and advanced design features, they represent a significant investment in health and well-being. Whether for home use or small businesses, these systems exemplify the importance of effective water purification technology in maintaining high standards of water quality.