Normal Operation

OPERATION

WARNING: BURN HAZARD

Contact with boiling water can cause severe burns.

Always wear protective clothing and heat resistant gloves when operating the appliance.

CAUTION:

Hot Surface

Exposed surfaces can be hot to the touch and may cause burns.

Fig. 3 Temperature Control Knob

Fig. 4 Water Level Marking

NOTE: If the water pot is allowed to boil dry and exceeds 275ºF, the hi-limit safety will shut down the unit and light the red TROUBLE indicator. To reset:

Allow the water pot to cool, refill with fresh water, then press the red button on the back of the element head until it “clicks” and stays in. If tripping persists, see Troubleshooting Suggestions, page 8.

1.a. Be sure the TEMPERATURE CONTROL KNOB is turned to OFF.

b.Lower the ELEMENT HEAD into the frypot by pushing back on the BASKET SUPPORT ROD, raising the ELEMENT HEAD SUPPORT ROD, then carefully lowering the elements.

2.Fill the WATER POT with fresh water to the scribed water level line. Capacity: 9 quarts

IMPORTANT: DO NOT overfill the water pot. Cold water will expand as it heats. Adding too much water will allow the water pot to overflow during operation.

Water will evaporate, and be captured by the food product during cooking. For best results, maintain proper water level in the water pot during operation.

3.Turn the TEMPERATURE CONTROL KNOB to the desired temperature. The HEAT INDICATOR will glow. When the water reaches the desired temperature, the heat indicator will go out. The heat indicator will go off and on during operation as the thermostat cycles to maintain temperature.

Pre-heat times 70ºF to 210ºF (approximate): F-49RT (208 volts) - 20 minutes F-49RT (240 volts) - 10 minutes

4.Load one to four portion cups no more than 1/2 full with pasta.

a.DO NOT overload portion cups. For best results, load portion cups uniformly to half full.

b.Using the handle, lower the rack into the hot water. Cooking time is approximately 30 seconds.

c.When food is cooked, lift the rack out of the water by the handle. Hang the rack on the RACK SUPPORT ROD to drain.

5.When the heat indicator light cycles off, the rethermalizer is ready to cook the next load.

Approximate performance guide (refrigerated to serving temperature)

F-49RT (208 volts) - 120 4 oz. servings per hour F-49RT (240 volts) - 180 4 oz. servings per hour

6.Reduce temperature control to 150ºF or less during idle periods to save power. The rethermalizer will return to operating temperature in just a few minutes when needed.

7.Keep the rethermalizer clean at all times. Rinse portion cups and baskets frequently to minimize starch build up,

8.Drain the rethermalizer completely after use. Replace the water in the water pot daily, or more often if starch build up is excessive. Allow the water pot to cool before removing it from the cabinet.

F-49RT specifications

The Wells F-49RT is a cutting-edge piece of equipment designed for the commercial foodservice industry, specifically for holding and warming food items to ensure optimal quality and temperature. It stands out for its ability to maintain food safety while preserving flavors and textures, which is crucial in restaurant operations and catering services.

One of the main features of the Wells F-49RT is its impressive capacity. The unit can accommodate full-size pans, making it suitable for a wide range of foods such as meats, vegetables, and side dishes. This design allows for efficient use of space and ensures that a variety of items can be held simultaneously. The interior is constructed from durable stainless steel, ensuring longevity and easy cleaning, while the exterior is also designed with rugged materials capable of withstanding the demands of a busy kitchen environment.

The Wells F-49RT utilizes advanced heating technology to provide consistent and reliable temperature control. Its heated base and side wall heating elements ensure even heat distribution, eliminating cold spots and maintaining food at safe holding temperatures. This tailored heating system is vital for preserving the quality of food items and reducing the risk of spoilage.

Another innovative technology featured in the Wells F-49RT is its intuitive digital control panel. This user-friendly interface allows operators to easily set and monitor temperatures with precision. The digital readout provides real-time feedback, ensuring that all items are held at optimal temperatures while minimizing energy consumption.

To enhance flexibility, the Wells F-49RT is equipped with adjustable shelves, giving operators the ability to customize the interior layout based on the specific needs of their menu offerings. This design not only maximizes storage capacity but also allows for easy access and organization.

Additionally, the Wells F-49RT is built with mobility in mind. The unit is fitted with sturdy casters, allowing for easy movement and positioning within the kitchen or serving area. This mobility is essential for adapting to the changing needs of a high-paced commercial environment.

In summary, the Wells F-49RT is an essential asset for foodservice professionals. Its combination of capacity, advanced heating technology, user-friendly controls, and efficient design make it an invaluable tool for maintaining food quality and safety in today's competitive culinary landscape. With its robust construction and adaptability, the Wells F-49RT is poised to enhance the operational efficiency of any kitchen.