Wells F-88 operation manual Installation, Unpacking & Inspection, Setup

Page 6

This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions and maintained according to the instructions in this manual.

This appliance is UListed under UL File E6070 for 208V and 240V.

INSTALLATION

UNPACKING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the Appliance before connecting electrical power or otherwise performing any installation procedure.

Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.

Read and understand all labels and diagrams attached to the appliance.

Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.

COMPONENTS

1 or 2 ea.

FRYPOT

1, 2 or 4 ea.

FRY BASKET

4 ea.

ADJUSTABLE LEGS

SETUP

Setup the appliance only on a firm, level, non-combustible surface. Verify local codes for requirements. Concrete, tile, terrazzo or metal surfaces are recommended. Metal over combustible material may not meet code for non-combustible surfaces.

Install one adjustable leg at each corner of the fryer by screwing the leg into the fitting on the bottom. With a spirit level, check that the appli- ance is level front-to-back and side-to-side. Verify that the unit sits firmly ON ALL FOUR LEGS.

The lower portions of the legs are adjustable by turning; adjust as required to level the appliance. All four legs must be adjusted to firmly contact the counter in order to prevent tipping.

Refer to the Installation Instruction Sheet for required clearances. Maintain required clearances between the appliance and adjacent combustible surfaces.

Avoid storing flammable or combustible materials in, on or near the appliance.

NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

IMPORTANT:

This installation must comply with all applicable Federal, Local and NFPA codes.

Fig. 2 Adjustable Legs

M302 p/n 307589 OpM Countertop Autolift Fryers

4

Image 6
Contents Autolift Fryers Countertop Models Important do not Discard this ManualM302 p/n 307589 OpM Countertop Autolift Fryers Model Volts Amps Watts Power Supply Cord IntroductionElectric Shock Hazard Disconnect power before Precautions and General Information Risk DamageHOT Surface Installation SetupUnpacking & Inspection Installation Fryer Electrical InstallationOperation Normal OperationPreparation Cleaning InstructionsCleaning FrequencyOIL Disposal Slip and Fall HazardHealth Hazard M302 p/n 307589 OpM Countertop Autolift Fryers Periodic Cleaning Important Use only factory authorized service parts Genuin e Parts

F-88 specifications

The Wells F-88 is an impressive aircraft that has gained traction in various aviation circles for its unique blend of performance, design, and innovative technologies. Designed for versatility, the F-88 serves multiple roles, including light attack, reconnaissance, and training, making it a valuable asset in both military and civilian aviation.

One of the main features of the Wells F-88 is its aerodynamic design, which contributes to its exceptional performance and fuel efficiency. The aircraft boasts a sleek fuselage and a high-wing configuration, enabling it to maintain stability during various flight maneuvers. This design is complemented by its retractable landing gear, allowing the F-88 to achieve higher speeds and improved overall aerodynamic efficiency.

The cockpit of the F-88 is equipped with a modern avionics suite that enhances situational awareness and ease of operation for pilots. The glass cockpit design features advanced displays, including multi-function screens that provide critical data at a glance. This innovation allows pilots to quickly assess flight conditions and control the aircraft more effectively, contributing to overall safety and efficiency during missions.

Powering the Wells F-88 is a high-performance turbofan engine that delivers impressive thrust while maintaining low fuel consumption. This engine not only enhances the aircraft's speed and climb rate but also reduces its operational costs, further increasing its appeal for military and civilian operators alike. The F-88 can reach speeds of up to 400 knots and has a service ceiling of approximately 30,000 feet.

In terms of operational characteristics, the Wells F-88 is capable of executing various mission profiles. Its payload capacity allows for the integration of a wide array of weapons systems, from precision-guided munitions to reconnaissance equipment. Additionally, the aircraft's ability to operate from shorter runways makes it suitable for deployment in remote locations, providing tactical flexibility in diverse environments.

Safety is a paramount concern in the design of the Wells F-88, with features such as redundant flight systems and advanced emergency procedures. The aircraft's structure is designed to withstand the rigors of various flight conditions, ensuring durability and reliability throughout its service life.

Overall, the Wells F-88 stands out as a multifaceted aircraft that harnesses cutting-edge technologies and design principles. With a focus on performance, safety, and operational versatility, the F-88 is well-positioned to serve the needs of diverse operators, solidifying its role in the future of aviation.