Wells F-88 operation manual Periodic Cleaning

Page 12

Periodic cleaning is necessary to remove carbonization from the elements and frypot.

Frypot may be cleaned by the method described at right, or with a commercial frypot cleaner. Be sure to follow the manufacturer's directions.

Before cleaning, ALWAYS:

•Turn heat switch and temperature control OFF and allow fryer to cool.

•Drain the oil and wipe out the frypot.

PERIODIC CLEANING

Add 1/2 cup of granulated dishwasher detergent to frypot. Fill with water to MAX OIL line.

Lower element into the frypot. Press heat switch ON and set temperature control knob to 225ºF.

Boil the mixture for five minutes. Turn heat switch and control knob OFF. Allow mixture to set in frypot overnight.

After soak period, raise elements and remove any remaining carbonization with a stiff bristle brush. Be careful that capillary tubes of the thermobulbs are not moved or damaged during cleaning.

Drain frypot and wash with warm water and mild detergent.

Reinstall the frypot in the fryer. Add 1 quart of vinegar, then fill to the MAX OIL line with cold water.

Lower elements into the vinegar solution with heat switch and temperature control OFF. Allow to set for 15 minutes.

Drain the frypot and rinse with clean water. Dry the frypot and elements thoroughly before returning the fryer to operation.

IMPORTANT: Nickel plated frypot must be dried completely in order to prevent rusting, and to eliminate water contamination of the cooking oil.

M302 p/n 307589 OpM Countertop Autolift Fryers

10

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Autolift Fryers Countertop Models Important do not Discard this ManualM302 p/n 307589 OpM Countertop Autolift Fryers Model Volts Amps Watts Power Supply Cord IntroductionElectric Shock Hazard Disconnect power before Precautions and General Information Risk DamageHOT Surface Installation SetupUnpacking & Inspection Installation Fryer Electrical InstallationOperation Normal OperationCleaning Instructions CleaningPreparation FrequencyOIL Disposal Slip and Fall HazardHealth Hazard M302 p/n 307589 OpM Countertop Autolift Fryers Periodic Cleaning Important Use only factory authorized service parts Genuin e Parts

F-88 specifications

The Wells F-88 is an impressive aircraft that has gained traction in various aviation circles for its unique blend of performance, design, and innovative technologies. Designed for versatility, the F-88 serves multiple roles, including light attack, reconnaissance, and training, making it a valuable asset in both military and civilian aviation.

One of the main features of the Wells F-88 is its aerodynamic design, which contributes to its exceptional performance and fuel efficiency. The aircraft boasts a sleek fuselage and a high-wing configuration, enabling it to maintain stability during various flight maneuvers. This design is complemented by its retractable landing gear, allowing the F-88 to achieve higher speeds and improved overall aerodynamic efficiency.

The cockpit of the F-88 is equipped with a modern avionics suite that enhances situational awareness and ease of operation for pilots. The glass cockpit design features advanced displays, including multi-function screens that provide critical data at a glance. This innovation allows pilots to quickly assess flight conditions and control the aircraft more effectively, contributing to overall safety and efficiency during missions.

Powering the Wells F-88 is a high-performance turbofan engine that delivers impressive thrust while maintaining low fuel consumption. This engine not only enhances the aircraft's speed and climb rate but also reduces its operational costs, further increasing its appeal for military and civilian operators alike. The F-88 can reach speeds of up to 400 knots and has a service ceiling of approximately 30,000 feet.

In terms of operational characteristics, the Wells F-88 is capable of executing various mission profiles. Its payload capacity allows for the integration of a wide array of weapons systems, from precision-guided munitions to reconnaissance equipment. Additionally, the aircraft's ability to operate from shorter runways makes it suitable for deployment in remote locations, providing tactical flexibility in diverse environments.

Safety is a paramount concern in the design of the Wells F-88, with features such as redundant flight systems and advanced emergency procedures. The aircraft's structure is designed to withstand the rigors of various flight conditions, ensuring durability and reliability throughout its service life.

Overall, the Wells F-88 stands out as a multifaceted aircraft that harnesses cutting-edge technologies and design principles. With a focus on performance, safety, and operational versatility, the F-88 is well-positioned to serve the needs of diverse operators, solidifying its role in the future of aviation.
Top Page Image Contents