Wells F-14 operation manual Precautions and General Information, Risk Damage, HOT Surface

Page 5

PRECAUTIONS AND GENERAL INFORMATION

DANGER: BURN HAZARD

Contact with hot oil will cause severe burns. Always wear protective clothing and heat resistant gloves when operating the fryer or filtering the oil.

WARNING: ELECTRIC SHOCK HAZARD

All servicing requiring access to non-insulated components must be performed by qualified service personnel. DO NOT open any access panel that requires the use of tools. Failure to heed this warning may result in severe electric shock.

CAUTION: BURN HAZARD

Contact with hot oil may cause burns. DO NOT fill fryer beyond MAX OIL line on frypot. For disposal of oil use only a container specifically designed for the disposal of hot oil. DO NOT fill hot oil disposal container beyond MAX OIL line.

301 p/n 307588 OpM CT Std Fryers

This appliance is intended for use in commercial establishments only.

This appliance is intended to prepare food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

DO NOT submerge this appliance in water. This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring. Do not splash or pour water on, in or over any controls, control panel or wiring.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Important do not Discard this Manual 1725301 p/n 307588 OpM CT Std Fryers 1725 Model Volts Amps Watts Power Supply CordIntroduction 301 p/n 307588 OpM CT Std Fryers HOT Surface Precautions and General InformationRisk Damage Unpacking & Inspection InstallationSetup Electric Shock Hazard F-49 Fryer Electrical Installation55, F-67, F-85 and F-1725 Fryer Electrical Installation Normal Operation OperationCleaning Cleaning InstructionsPreparation FrequencyHealth Hazard OIL DisposalSlip and Fall Hazard 301 p/n 307588 OpM CT Std Fryers Periodic Cleaning Wells Bloomfield, LLC Important Use only factory authorized service partsGenuin e Parts

F-14 specifications

The Wells F-14 is a remarkable aircraft that has captured the interest of aviation enthusiasts and professionals alike. This fighter jet, developed by Grumman Aircraft Engineering Corporation and later known as Northrop Grumman, boasts a rich history and a multitude of advanced features that made it a formidable presence in both military and civilian aviation.

One of the standout characteristics of the F-14 is its variable-sweep wing design. This innovative technology allows the wings to change their position during flight, optimizing performance during different flight phases. The wings can extend for improved lift during slow-speed flight, such as takeoff and landing, and sweep back for enhanced speed and maneuverability in high-speed combat situations. This feature significantly increases operational versatility, allowing the aircraft to excel in a wide range of missions.

The F-14 is powered by two Pratt & Whitney TF30 turbofan engines, providing it with impressive speed and range. Capable of reaching speeds exceeding Mach 2.0, the F-14 can quickly engage enemies or evade threats. Additionally, the aircraft's thrust-to-weight ratio enables quick acceleration, making it a nimble performer in various combat scenarios.

Equipped with a sophisticated avionics suite, the F-14 features advanced radar and targeting systems. The AN/AWG-9 radar system, one of the most significant components, enables the aircraft to track multiple targets at long ranges, providing pilots with critical situational awareness. The F-14 can be armed with a combination of air-to-air missiles, such as the AIM-54 Phoenix, AIM-7 Sparrow, and AIM-9 Sidewinder, as well as a 20mm M61 Vulcan cannon, allowing it to engage a diverse range of aerial threats.

Another notable feature of the F-14 is its crew configuration; it typically operates with a pilot and radar intercept officer, which enhances combat effectiveness through the division of responsibilities. This two-person crew maximizes situational awareness and allows for more tactical flexibility during missions.

The F-14 has left a legacy in aviation history, known for its role in the U.S. Navy and its appearances in popular culture, particularly in the film "Top Gun." Its unique combination of strength, agility, and cutting-edge technology has made it an enduring symbol of military aviation. As newer aircraft have emerged, the F-14's design and capabilities continue to influence modern fighter development, ensuring that its legacy will be felt for generations to come.
Top Page Image Contents