Wells F-14 operation manual Installation, Unpacking & Inspection, Setup

Page 6

This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions and maintained according to the instructions in this manual.

This appliance is UListed under UL File E6070 for 120V, 208V and 240V.

INSTALLATION

UNPACKING & INSPECTION

Carefully remove the appliance from the carton. Remove all protective plastic film, packing materials and accessories from the Appliance before connecting electrical power or otherwise performing any installation procedure.

Carefully read all instructions in this manual and the Installation Instruction Sheet packed with the appliance before starting any installation.

Read and understand all labels and diagrams attached to the appliance.

Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.

COMPONENTS

1 or 2 ea. FRYPOT

2 or 4 ea. FRY BASKETS

4 ea.

ADJUSTABLE LEGS (except F-14)

4 ea.

RUBBER FEET (F-14 only)

SETUP

Setup the appliance only on a firm, level, non-combustible surface. Verify local codes for requirements. Concrete, tile, terrazzo or metal surfaces are recommended. Metal over combustible material may not meet code for non-combustible surfaces.

Install one adjustable leg at each corner of the fryer by screwing the leg into the fitting on the bottom. With a spirit level, check that the appliance is level front-to-back and side-to-side. Verify that the unit sits firmly ON ALL FOUR LEGS OR RUBBER FEET.

The lower portions of the legs are adjustable by turning; adjust as required to level the appliance. All four legs or rubber feet must be adjusted to firmly contact the counter in order to prevent tipping.

Refer to the Installation Instruction Sheet for required clearances. Maintain required clearances between the appliance and adjacent combustible surfaces.

Avoid storing flammable or combustible materials in, on or near the appliance.

NOTE: DO NOT discard the carton or other packing materials until you have inspected the appliance for hidden damage and tested it for proper operation.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

IMPORTANT:

This installation must comply with all applicable Federal, Local and NFPA codes.

301 p/n 307588 OpM CT Std Fryers

Fig. 2 Adjustable Legs

4

Page 5 Page 7
Image 6
Page 5 Page 7
Contents 1725 Important do not Discard this Manual301 p/n 307588 OpM CT Std Fryers Model Volts Amps Watts Power Supply Cord Introduction1725 301 p/n 307588 OpM CT Std Fryers Precautions and General Information Risk DamageHOT Surface Installation SetupUnpacking & Inspection F-49 Fryer Electrical Installation 55, F-67, F-85 and F-1725 Fryer Electrical InstallationElectric Shock Hazard Operation Normal OperationPreparation Cleaning InstructionsCleaning FrequencyOIL Disposal Slip and Fall HazardHealth Hazard 301 p/n 307588 OpM CT Std Fryers Periodic Cleaning Important Use only factory authorized service parts Wells Bloomfield, LLCGenuin e Parts

F-14 specifications

The Wells F-14 is a remarkable aircraft that has captured the interest of aviation enthusiasts and professionals alike. This fighter jet, developed by Grumman Aircraft Engineering Corporation and later known as Northrop Grumman, boasts a rich history and a multitude of advanced features that made it a formidable presence in both military and civilian aviation.

One of the standout characteristics of the F-14 is its variable-sweep wing design. This innovative technology allows the wings to change their position during flight, optimizing performance during different flight phases. The wings can extend for improved lift during slow-speed flight, such as takeoff and landing, and sweep back for enhanced speed and maneuverability in high-speed combat situations. This feature significantly increases operational versatility, allowing the aircraft to excel in a wide range of missions.

The F-14 is powered by two Pratt & Whitney TF30 turbofan engines, providing it with impressive speed and range. Capable of reaching speeds exceeding Mach 2.0, the F-14 can quickly engage enemies or evade threats. Additionally, the aircraft's thrust-to-weight ratio enables quick acceleration, making it a nimble performer in various combat scenarios.

Equipped with a sophisticated avionics suite, the F-14 features advanced radar and targeting systems. The AN/AWG-9 radar system, one of the most significant components, enables the aircraft to track multiple targets at long ranges, providing pilots with critical situational awareness. The F-14 can be armed with a combination of air-to-air missiles, such as the AIM-54 Phoenix, AIM-7 Sparrow, and AIM-9 Sidewinder, as well as a 20mm M61 Vulcan cannon, allowing it to engage a diverse range of aerial threats.

Another notable feature of the F-14 is its crew configuration; it typically operates with a pilot and radar intercept officer, which enhances combat effectiveness through the division of responsibilities. This two-person crew maximizes situational awareness and allows for more tactical flexibility during missions.

The F-14 has left a legacy in aviation history, known for its role in the U.S. Navy and its appearances in popular culture, particularly in the film "Top Gun." Its unique combination of strength, agility, and cutting-edge technology has made it an enduring symbol of military aviation. As newer aircraft have emerged, the F-14's design and capabilities continue to influence modern fighter development, ensuring that its legacy will be felt for generations to come.
Top Page Image Contents