10.The message “Enable?”is displayed.
11.Press the 
button to confirm the selection. “Hot water Confirm?”is displayed.
12.Position a container with a minimum capacity of 100 ml under the hot water spout.
13.Press the 
button to confirm the selection. The appliance begins delivering hot water and the message
“Please wait... “ is displayed.
14.After delivery, the appliance returns automatically to the “Ready for coffee” position.
The new filter is active. You can now use the coffee maker.
Replacing the filter
When “REPLACE FILTER” is displayed, after two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the filter:
1.Remove the exhausted filter;
2.Remove the new filter from the packaging.
3.Turn the date indicator disk (see fig. 33) until the next 2 months of use are displayed (the filter lasts about two months);
4.Refill the tank;
5.Insert the filter in the water tank and immerse it completely, tilting it to enable the air bubbles to escape (fig. 34);
6.Place the filter in the filter housing (fig. 35aa) and press as far as it will go. close the tank with the lid (fig. 35b), then replace the tank in the machine;
7.Position a container with a minimum capacity of 100 ml under the hot water spout.
8.Press the MENU/ESC button to enter the menu;
9.Press the MILK or CAPPUCCINO button until “Replace filter “ is displayed.
10.Press the 
button;
11.The message “Confirm?”is displayed.
12. | Press the | button to confirm the selection; |
13. | “Hot water… Confirm?”is displayed. | |
14. | Press the | button to confirm the selection. the |
| appliance begins delivering hot water and the message | |
| “Please wait “ is displayed. | |
15.After delivery, the appliance returns automatically to the “ready for coffee” position.
The new filter is now active and you can use the coffee maker.
Removing the filter
If you want to continue using the appliance without a filter, you must remove it and notify the appliance of its removal as follows:
1.Extract the tank and exhausted filter;
2.Press the MENU/ESC button to enter the menu;
3.Press the MILK or CAPPUCCINO button (fig. 8) until “Install filter Enabled”is displayed;
4.Press the 
button
5.“Disable?”is displayed;
6. Press the 
button to confirm and the MENU/ESC button to exit the menu.
TECHNICAL SPECIFICATION
7PMUBHF | 7_)[NBY" |
Absorbed power: | 1450W |
Pressure: | 15 bar |
Water tank capacity: | 2.0 litres max. |
Size Lxhxd: | 238x350x445 mm |
Cable length: | 1.80 m |
Weight: | 11.8 kg |
Beans container capacity: | 250 g max. |
The appliance complies with the following EC directives:
t 4UBOECZ%JSFDUJWFOP
t
t &.$EJSFDUJWF&$BOETVCTFRVFOUBNFOENFOUT t .BUFSJBMTBOEBDDFTTPSJFTDPNJOHJOUPDPOUBDUXJUIGPPE
conform to eec regulation 1935/2004.
DISPOSAL
Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources.As a reminder of the need to dispose of household appliances separately, the product is marked with a
19