DirecTV HIRD-D01, HIRD-D11 owner manual

DIRECTV SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL

If you decide to install the satellite dish antenna yourself, we recommend you purchase the Do-It- Yourself Instillation Kit. It contains many items you will need to complete most installations.

You will need some of the following tools, depending on your installation:

∙Electric drill

∙Drill bits (1/8-inch, 3/16-inch, 1/2-inch masonry)

∙Tape measure

∙Wrenches (3/8-inch, 7/16-inch, or adjustable)

∙Wheelbarrow or concrete mixing box

∙Hacksaw

∙Sledge hammer

∙	Carpenter’s level	∙	Hammer	Flat blade screwdriver
			∙
∙	Pencil or chalk	∙	Hole digging tools	Phillips screwdriver
			∙

Confirm that you have all of the satellite dish antenna kit components.

∙	Steel reflector (1)	∙	LNB (1)	∙	Flat head screws (4)
∙	Mast (1)	∙	¼-inch nuts (5)	∙	¼-20 x ½-inch
∙	Base plate (1)	∙	Retainer screw (2)		grounding bolt (1)
∙ LNB support arm (1)		∙	Cable clip (1)

If you are missing any parts contact the Customer Care Center at 1-800-274-8995.

PAGE 4-4