DirecTV HIRD-E25 Directv Plus System Components, Satellite Antenna, Digital Satellite Receiver

Page 10

DIRECTV PLUS SYSTEM FROM HUGHES NETWORK SYSTEMS - OWNER’S MANUAL

DIRECTV PLUS System

Components

There are three main components of your DIRECTV PLUS System. They are the satellite dish antenna, the digital satellite receiver, and the remote control. Take a few minutes to read about each one.

The Satellite Antenna

The satellite antenna is the component that receives the digital signals. It must be mounted to a solid outdoor surface that allows a clear view of the southern sky.

The large dish-shaped part is known as the reflector. Your reflector may be fairly round (18”) or oval shaped (18” high by 24” wide).

At the end of a tubular arm that is attached to the satellite antenna, there is a low noise block (LNB) assembly. Satellite antennas come in a variety of LNB configurations. Your assembly may provide for receiving signals from multiple satellites and/or distributing the signal to one or more satellite receivers.

The mounting bracket and base plate make adjustments easy during installation. Once the satellite dish antenna has been properly positioned to point toward the satellites, you should never need to adjust it again.

Refer to the instructions in Chapter 4, “Installing the Satellite

 

Antenna” or other satellite antenna installation instructions to

 

determine the type of antenna you have.

The satellite dish antenna

The Digital Satellite Receiver

This digital satellite receiver is one of the most compact available today. The basic features for setup, installation, and viewing programming can be accessed from the front panel keys.

The front of the digital satellite receiver

Your access card is located behind the door on the right side of the digital satellite receiver. This special card contains information about your level of service and holds pay per view purchase activity. This card should not be removed except to protect the digital satellite receiver from unauthorized use or to replace the card when DIRECTV supplies a new one.

The power key () is used to turn the digital satellite receiver on and off. The power light (located next to the power key) will illuminate when the unit is on. Any off-air signal, such as

cable TV or local programming, connected to the IN FROM ANT jack is passed through to the OUT TO TV jack when the digital satellite receiver power is off.

The two directional keys, up ( ) and down ( ) are used to navigate the highlight around the menus. They also provide access to the OneLineGuide when menus are not displayed.

The select key ( ) is used to choose a highlighted menu item. Also, pressing when no other instruction is being shown over video, a description of the current program and an additional press will display any available synopsis of the program.

Some keys can be pressed in combination to achieve other functions. These include:

combined with to restart the system (known as a “soft boot”)

The DIRECTV PLUS System Access Card

PAGE 1-2

Image 10
Contents HIRD-E25 Directv Important Safety Instructions Installation Service Federal Comunications Commission FCC Regulatory Information Table of Contents Digital Satellite RECEIVER’S What You Should Do First How Does All This Work?Satellite Antenna Directv Plus System ComponentsDigital Satellite Receiver First Look AT the Directv Plus Digital Satellite Receiver Remote Control MoviesInstalling Remote Control Batteries Choosing the BestHook Up the Audio/S-video Signals Connection for Your Entertainment SystemHook Up the Audio/Video Signals Hook Up the RF SignalsHook Up to a Stereo System Finishing UpFinding the VCR’s Remote Control Sensor Connecting the VCR Control CableNow You Can Turn It On Page Front Panel vs. Remote Control Keys Basic NavigationPage Satellite Antenna Determine Where to Point Your Satellite Dish Antenna Installation screenInstalling and Pointing Your Satellite Dish Antenna Alignment Result Pop-up PanelChoosing the Antenna Installation Site Selecting a Mounting Option Installing the Satellite Dish Antenna onto a Wooden Surface Installation ProcedureInstalling and Pointing Your Satellite Dish Antenna Installing the Satellite Dish Antenna onto a Brick Surface Installation Procedure Toggler installation steps Installing the Satellite Dish Antenna onto a Metal Pole Attaching the Reflector onto the LNB Support ArmAssembling the Satellite Dish Antenna Grounding the Metal Pole Mount Grounding the Base PlateInstalling and Routing the LNB Coaxial Cable Connecting the Coaxial Cable to the LNB Attaching the LNB to the LNB Support ArmRouting the LNB Cable to the Satellite Receiver Connecting the Satellite Dish AntennaPositioning the Satellite Dish Antenna Pointing the Satellite Dish Antenna Using the Box Method Page Authorizing Your Service DirectvPage Channel Banner Basic Channel ChangingInformation Banner TurboTune OneLine GuideAlphaTune Alternate Services Alt. AudioPage ON-SCREEN Guides Choosing the Guide StyleGeneral On-Screen Guide Features DescriptionsPreSelecting Programs for Taping Using PreSelectCanceling PreSelected Programs PreSelecting Programs for ViewingProgram Guide SM. Cell Program Guide LG. Cell Title Guide Logo GuideFiltering the Guides Watchwordtm GuideTheme Filters Channel List Guide TimesDone Information ScreenClass Filters ViewPreSelect To View Cancel PreSelectBuy Buy Options Cancel PurchaseShow Times Page Digital Satellite RECEIVER’S Menu System Menu OverviewMain Menu Places to go from the Main MenuSetup Menu Places to go from the Setup MenuScheduler Things to do in the Setup MenuCurrent settings overview Things to do in the Scheduler screenMessage Check MailThings to do in the Check Mail screen ErasePlaces to go from the Purchases screen PurchasesLock/Unlock Things to do on the Purchases screenUnlocking Procedure Locking ProcedureTemporarily Overriding the Lock Places to go from the Preferences screen PreferencesThings to do in the Preferences screen Advanced Preferences Things to do in the Advanced Preferences screenTV Timer Demo ModeFactory Defaults LimitsMax Rating Channel ListsThings to do in the Limits screen Max SpendingPlaces to go from the Channel Lists screen Things to do in the Channel Lists screenPlaces to go from the Installation screen InstallationThings to do in the Turbotune Setup screen TurboTuneDish Type Things to do in the Installation screenPosition System Test VCR SetupThings to do in the VCR Setup screen Things to do in the System Test screenScreen WatchWordThings to do in the Watchword WatchWord #Code Scan Programming the Remote ControlProgramming Mode Code EntryVCR Code Number Using the Remote Control Programming Your Remote ControlControlling Other Components Using the AUX Button Identifying Codes that Have Been StoredAssigning a Device to a Different Device Key Page Questions a P P E N D I X Answersand a Page Limited Warranty Revision a

HIRD-E11, HIRD-E25 specifications

The DirecTV HIRD-E11 and HIRD-E25 are cutting-edge satellite receivers designed to enhance the television viewing experience by delivering high-quality content and versatile functionalities. Both models cater to the evolving needs of consumers, integrating advanced technologies that enable seamless access to a wide range of channels and services.

One of the main features of both the HIRD-E11 and HIRD-E25 is their support for high-definition (HD) programming, which provides viewers with crystal-clear images and vibrant colors. These receivers are engineered to decode HD signals, allowing subscribers to enjoy premium content in stunning resolution. The HIRD-E25, in particular, offers enhanced capabilities, including 4K video output for an even more immersive viewing experience.

Another notable characteristic of these receivers is their multi-room capabilities. With the installation of additional units, users can watch different channels in various rooms simultaneously, making it an ideal solution for families or households with multiple television sets. This convenience is further enhanced by the use of DirecTV’s Whole-Home DVR system, which enables seamless recording and playback of shows across multiple devices.

The HIRD-E11 and HIRD-E25 are equipped with advanced digital tuners, ensuring better signal reception and reducing the likelihood of interruptions due to weather or other environmental factors. Additionally, the receivers come with built-in support for a wide range of audio formats, including Dolby Digital, ensuring that viewers receive high-quality sound to complement their visual experience.

In terms of usability, these models are designed with user-friendly interfaces that make channel navigation and program selection intuitive. The remote controls are also thoughtfully designed, featuring dedicated buttons for quick access to popular features and functionalities, including the guide, record options, and search capabilities.

Moreover, the HIRD-E25 includes enhanced connectivity options, such as HDMI, USB, and Ethernet ports. This allows users to connect their receivers to a variety of external devices, including gaming consoles and streaming devices, further expanding their entertainment options.

In summary, the DirecTV HIRD-E11 and HIRD-E25 satellite receivers stand out for their combination of high-definition video support, multi-room functionality, advanced tuners, and user-friendly features. With these models, DirecTV continues to provide robust solutions that meet the growing demands of modern television audiences.