DirecTV HIRD-E25, HIRD-E11 owner manual Federal Comunications Commission FCC Regulatory Information

Page 6

FEDERAL COMUNICATIONS COMMISSION (FCC)

REGULATORY INFORMATION

Federal Communications Commission (FCC)—The DIRECTV PLUS System complies with both Part 15 and Part 68 of the FCC rules.

Part 15 compliance —

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by removing and applying power to the equipment, the user is encouraged to try to correct the interference by one or more of the following measures:

∙Reorient or relocate the receiving satellite dish antenna.

∙Increase the separation between the equipment and the digital satellite receiver.

∙Connect the equipment into an outlet on a circuit different from that to which the digital satellite receiver is connected.

∙Consult the dealer or an experienced radio/TV technician for help.

The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify and Resolve Radio and TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington, DC.

To meet FCC requirements, only peripherals (computer input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this device. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

To meet FCC requirements, shielded cables are required to connect the device to a personal computer, peripheral, or other Class B certified device.

Part 68 compliance —

1.The FCC has established Part 68 of the FCC Rules, which permit this device to be directly connected to the telephone network. Standardized jacks are used for these connections. This equipment should not be used on coin lines or party lines.

2.If this device is malfunctioning, it may also be causing harm to the telephone network; this device should be disconnected until the source of the problem can be determined and until repair has been made. If this is

not done, the telephone company may temporarily disconnect service.

3.The telephone company may make changes in its technical operations and procedures; if such changes affect the compatibility or use of this device, the telephone company is required to give adequate notice of the changes. You will be advised of your right to file a complaint with the FCC.

4.If the telephone company requests information on what equipment is connected to their lines, inform them of:

∙the telephone number this unit is connected to.

∙the ringer equivalence number (REN). The number can be found on a label located on the bottom of the equipment.

∙the Universal Service Order Code (USOC) jack required. This equipment requires a USOC RJ11 jack.

∙the FCC registration number. The number can be found on a label located on the bottom of this equipment.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents HIRD-E25 Directv Important Safety Instructions Installation Service Federal Comunications Commission FCC Regulatory Information Table of Contents Digital Satellite RECEIVER’S What You Should Do First How Does All This Work?Directv Plus System Components Satellite AntennaDigital Satellite Receiver First Look AT the Directv Plus Digital Satellite Receiver Remote Control MoviesInstalling Remote Control Batteries Choosing the BestHook Up the Audio/S-video Signals Connection for Your Entertainment SystemHook Up the Audio/Video Signals Hook Up the RF SignalsHook Up to a Stereo System Finishing UpConnecting the VCR Control Cable Finding the VCR’s Remote Control SensorNow You Can Turn It On Page Front Panel vs. Remote Control Keys Basic NavigationPage Satellite Antenna Determine Where to Point Your Satellite Dish Antenna Installation screenInstalling and Pointing Your Satellite Dish Antenna Alignment Result Pop-up PanelChoosing the Antenna Installation Site Selecting a Mounting Option Installing the Satellite Dish Antenna onto a Wooden Surface Installation ProcedureInstalling and Pointing Your Satellite Dish Antenna Installing the Satellite Dish Antenna onto a Brick Surface Installation Procedure Toggler installation steps Installing the Satellite Dish Antenna onto a Metal Pole Attaching the Reflector onto the LNB Support ArmAssembling the Satellite Dish Antenna Grounding the Metal Pole Mount Grounding the Base PlateInstalling and Routing the LNB Coaxial Cable Connecting the Coaxial Cable to the LNB Attaching the LNB to the LNB Support ArmConnecting the Satellite Dish Antenna Routing the LNB Cable to the Satellite ReceiverPositioning the Satellite Dish Antenna Pointing the Satellite Dish Antenna Using the Box Method Page Authorizing Your Service DirectvPage Basic Channel Changing Channel BannerInformation Banner OneLine Guide TurboTuneAlphaTune Alternate Services Alt. AudioPage ON-SCREEN Guides Choosing the Guide StyleGeneral On-Screen Guide Features DescriptionsPreSelecting Programs for Taping Using PreSelectCanceling PreSelected Programs PreSelecting Programs for ViewingProgram Guide SM. Cell Program Guide LG. Cell Title Guide Logo GuideWatchwordtm Guide Filtering the GuidesTheme Filters Channel List Guide TimesDone Information ScreenClass Filters ViewCancel PreSelect PreSelect To ViewBuy Cancel Purchase Buy OptionsShow Times Page Digital Satellite RECEIVER’S Menu System Menu OverviewMain Menu Places to go from the Main MenuSetup Menu Places to go from the Setup MenuScheduler Things to do in the Setup MenuCurrent settings overview Things to do in the Scheduler screenMessage Check MailThings to do in the Check Mail screen ErasePlaces to go from the Purchases screen PurchasesLock/Unlock Things to do on the Purchases screenLocking Procedure Unlocking ProcedureTemporarily Overriding the Lock Preferences Places to go from the Preferences screenThings to do in the Preferences screen Advanced Preferences Things to do in the Advanced Preferences screenTV Timer Demo ModeFactory Defaults LimitsMax Rating Channel ListsThings to do in the Limits screen Max SpendingPlaces to go from the Channel Lists screen Things to do in the Channel Lists screenPlaces to go from the Installation screen InstallationThings to do in the Turbotune Setup screen TurboTuneThings to do in the Installation screen Dish TypePosition System Test VCR SetupThings to do in the VCR Setup screen Things to do in the System Test screenScreen WatchWordThings to do in the Watchword WatchWord #Code Scan Programming the Remote ControlProgramming Mode Code EntryVCR Code Number Using the Remote Control Programming Your Remote ControlControlling Other Components Using the AUX Button Identifying Codes that Have Been StoredAssigning a Device to a Different Device Key Page Questions a P P E N D I X Answersand a Page Limited Warranty Revision a

HIRD-E11, HIRD-E25 specifications

The DirecTV HIRD-E11 and HIRD-E25 are cutting-edge satellite receivers designed to enhance the television viewing experience by delivering high-quality content and versatile functionalities. Both models cater to the evolving needs of consumers, integrating advanced technologies that enable seamless access to a wide range of channels and services.

One of the main features of both the HIRD-E11 and HIRD-E25 is their support for high-definition (HD) programming, which provides viewers with crystal-clear images and vibrant colors. These receivers are engineered to decode HD signals, allowing subscribers to enjoy premium content in stunning resolution. The HIRD-E25, in particular, offers enhanced capabilities, including 4K video output for an even more immersive viewing experience.

Another notable characteristic of these receivers is their multi-room capabilities. With the installation of additional units, users can watch different channels in various rooms simultaneously, making it an ideal solution for families or households with multiple television sets. This convenience is further enhanced by the use of DirecTV’s Whole-Home DVR system, which enables seamless recording and playback of shows across multiple devices.

The HIRD-E11 and HIRD-E25 are equipped with advanced digital tuners, ensuring better signal reception and reducing the likelihood of interruptions due to weather or other environmental factors. Additionally, the receivers come with built-in support for a wide range of audio formats, including Dolby Digital, ensuring that viewers receive high-quality sound to complement their visual experience.

In terms of usability, these models are designed with user-friendly interfaces that make channel navigation and program selection intuitive. The remote controls are also thoughtfully designed, featuring dedicated buttons for quick access to popular features and functionalities, including the guide, record options, and search capabilities.

Moreover, the HIRD-E25 includes enhanced connectivity options, such as HDMI, USB, and Ethernet ports. This allows users to connect their receivers to a variety of external devices, including gaming consoles and streaming devices, further expanding their entertainment options.

In summary, the DirecTV HIRD-E11 and HIRD-E25 satellite receivers stand out for their combination of high-definition video support, multi-room functionality, advanced tuners, and user-friendly features. With these models, DirecTV continues to provide robust solutions that meet the growing demands of modern television audiences.
Top Page Image Contents