Delphi SA10201 manual MljlIlDI~smlmlimg

Page 10

2.On placement:

Do not place the Delphi Audio System on an inclined or unstable surface.

Do not place anything within 1/2" of the side of the cabinet. The audio/ventilation ports must be unobstructed for the Delphi Audio System to operate properly and prolong the life of its components.

Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring-wound watches away from the unit to prevent possible damage from the magnetic fields.

3.Do not immerse in water.

This product is not meant to be immersed in water or come in continuous contact with water.

Before opening or shutting the receiver cradle or battery compartment panel, be sure to wipe off water, dust, or sand on the outside of the unit.

If the Delphi Audio System is splashed with salt water, wipe clean with a damp cloth, and then dry with a soft dry cloth. Do not wash under running water; do not use soap or detergent; do not dry with an electric hair dryer.

The supplied AC power adaptor is not water resistant. To prevent shock hazard, avoid using the Delphi Audio System near water during AC operation.

Water in the headphone jack may cause rusting and possible malfunction.

,

"

mlj(lIlDI~sm(lmlimg"

1.The power is not on:

Connect the AC power adaptor to a wall outlet securely and make sure the wall outlet has 110V AC output.

Make sure the batteries are inserted correctly.

Replace all the batteries with new ones if they are weak.

2.There is no audio:

Unplug the satellite radio receiver from the Delphi Audio System and re-insert it.

3.Noise is heard coming through the Delphi Audio System:

Someone is using a portable telephone or other equipment that emits radio waves near the antenna (-2.3GHz). To solve this problem, move the portable telephone, etc. away from the unit.

To clean the cabinet panel and controls, use a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzene.

Note: Unplug the AC power adaptor before cleaning to avoid any electric shock hazard.

10

Image 10
Contents Installation OwnersRecord Page Whats in the Box Using SKYFilSK¥Fi2wittl ttle Delptli Audio S~stem~ +000000 Indoor Installation on a Flat Surface TJsiAg the Delphi A.\ldie System Bass 8c Treble MljlIlDI~smlmlimg Specifications Ielphi ~o» FCC ID RS2SA10177 IC 5697A-SA10177 Table of Contents Brief History About Delphi About XMLet’s Get Started First, some important remindersPower ControlsDisplay Remote Control Activating Your roadyXT Listening to XM Selecting channelsSearching for channels by category Searching for channels by scanning Using presets Memory and jump Personalizing Your roadyXT Making any FM radio an XM radioContrast Screen colorAudio level Aiming the antenna TuneSelectTo ADD a Stock Symbol Stock TickerInfo Extras Direct Tune Changing display informationAuto-On Auto-Off and sleep timer Resetting to factory defaultOther Things You Should Know Accessories sold separatelyCare Troubleshooting If you see this on the display You shouldIf you see this on the display Other ThingsIf this happens You should If this happens You ShouldContacting Technical Support Technical InformationWarranty Delphi Limited Consumer WarrantyPage How you the Customer can get service How state law relates to the warrantyPage Page ~1~.-J Audio quality Ll.iJJtTh Radio 1D Page Or log on to IELPI-II XM Xmradio.com Page Vehicle Installation Guidelines for XM Satellite Radio Keep excess cable FCC Information ~.» F5\ Po55 ibiii tie