Oster 2700 instruction manual Instructions for USE, Before Using Your Oster Mixmaster Stand Mixer

INSTRUCTIONS FOR USE

BEFORE USING YOUR OSTER® MIXMASTER® STAND MIXER

Before assembling your Oster® Mixmaster® Stand Mixer, be sure the power cord is unplugged from the power outlet and the speed control dial is in the “O” position.

Figure 1

Figure 2 Figure 3

1.Press the tilt button located on the stand and swing the mixer head up. The mixer head will lock into this tilt position so you can insert the beaters or dough hooks and

the bowl (Figure 1).

2. Insert the beater with the round/oval shape

into the back socket and the beater with the flat bottom shape and plastic pieces into the front socket (the socket located on same side as the speed controls in the mixer) (Figure 2). To insert the dough hooks, place the one with the shorter hook into

the back socket and the one with the

longer hook into the front socket (the socket located on same side as the speed controls in the mixer) (Figure 3).

Important: Please review Figure 4. The illustration on the left is how the dough hooks should look when correctly inserted. However, should the dough hooks once inserted to be touching, as they do in the illustration on the right, then they have been inserted incorrectly.

Figure 4			Note: Be sure both beaters or dough
			hooks click firmly in place, you may need
			to twist the attachments slightly to engage
CORRECT	INCORRECT		them in position prior to pushing them into
			place.
		3. Place the mixing bowl onto the plate
			located on the stand and lock it by turning
			it clockwise (Figure 5).
		4. Press tilt button to lower the head with the
			attachments already in place and into the
			bowl. Ensure mixer head locks into place
			(Figure 6).
Figure 5	Figure 6
			4