Installation Guidelines
Overview of the Indoor Installation
The cable should not be installed into tight positions, as bending or applying excessive force to the connectors may damage the antenna cable. Always allow the cable to bend naturally around corners.
The recommended bend radius is 25 mm (1 in.).
The antenna cable must be secured along its complete length. No part of the antenna cable should be allowed to hang free. This is particularly important for cable parts that are installed outdoors.
Antenna cable and cable connectors are not designed to
!withstand excessive force:
CAUTION
1.Do not use connectors as cable grips to pull cable through raceways or conduits.
2.Do not use cable connectors to support the weight of the cable during or after installation.
3.Do not use tools to tighten connectors
4.Always seal connectors with waterproof stretch tape.
Before sealing outdoor connectors and permanently securing cables, verify that the installation is correct and all components function properly.
Outdoor Antenna Installation Guide |