Installing the Antenna
Mounting the Antenna
•
•
Four flatwashers and four nuts (included with antenna)
A socket wrench to tighten the nuts
2.Note the arrows on the plastic antenna mounting base.
3.Install the antenna with the arrows pointing up.
4.Attach the antenna mounting base and metal backing plate to the mast using
Always place flatwashers between nuts and the plastic
!antenna mounting base. Avoid overtightening the nuts to
CAUTION | prevent damage to the plastic antenna mounting base. |
|
5.Proceed to Connecting the Antenna Cable on page 4-10.
Figure 4-1 Mounting the 14-dBi Antenna to a Mast
Side View | Direction of Maximum Signal |
|
Clamp
Backing Plate
Antenna Mounting Base
Flatwasher
Always place flatwashers between nuts and the Antenna Mounting Base.
Top View
Outdoor Antenna Installation Guide |