Bose 321GS manual System Setup

English

System Setup

WARNING: Choose a stable and level surface for both speakers. Vibration can cause the speakers to move, particularly on smooth surfaces like marble, glass, or highly polished wood. If you are placing the speakers on a flat surface, be sure to attach the smaller of the two sets of supplied rubber feet to the bottom surface. You may obtain additional rubber feet (part number 178321) from Bose® customer service. To contact Bose, refer to the list of offices included in the product carton.

Be sure each 3•2•1 or 3•2•1 GS speaker faces straight ahead toward the listening area. Do not place the speakers at an angle (Figure 3).

Figure 3

Recommended placement of the 3•2•1 and 3•2•1 GS speakers, facing straight ahead toward the listening area, not angled

Note: Angling one or both speakers into or away from the listening area significantly alters system performance.

The 3•2•1 and 3•2•1 GS speakers are designed to sit only on their bottom surface, with the Bose logo right-side up (Figure 4).

Figure 4

Recommended orientation of the speakers, with Bose logo upright, not angled or upside down

10

AM271966_00_V.pdf August 18, 2003