Bose 321GS manual Making the final power connection, Connecting the power cord

English

System Setup

Selecting the correct video input on your TV

In order to play a DVD, your television must be set to receive signals from the correct video input jack.

Most TVs have a TV/VIDEO, INPUT, or AUX IN button for selecting the video input. When the TV is on, the words “VIDEO 1”, “VIDEO 2”, or “AUX” will usually appear in a corner of the screen to indicate which video input is currently selected.

Before playing a DVD, locate the name of the Video Input jack (on the TV) that you have connected the video cable to, then turn the TV on and select the video input (on the screen) that matches the name of that jack. If you are unable to locate the video input setting on your television, please consult your TV owner’s guide.

Note: Some combination TV/VCR units may not work with the Bose 3•2•1and 3•2•1 GS home entertainment systems. Please refer to your TV/VCR owner’s manual for information.

Note: A stereo or Hi-Fi VCR is required for optimal sound performance. If your VCR only has one audio output and is not labeled Stereo or Hi-fi, you have a mono VCR and require a Y-adapter cable (available at electronics stores) to connect audio to the media center.

Then select Mono decoding (see “Audio Setup menu” on page 40) so your TV will simulate surround sound effects. Otherwise you will hear mono sound from both speakers.

Making the final power connection

CAUTION: For dual voltage models only, be sure to set the dual voltage switch on the back of the Acoustimass® module to the appropriate voltage for your area (115V or 230V) before connecting to power. If you are not sure about the proper voltage for your area, consult your local electrical authorities.

To make the final connection, insert the small connector end of the power cord into the AC INPUT jack on the module. Insert the large end of the cord into an AC power (mains) outlet (Figure 19).

Figure 19

Connecting the power cord

AC input

jack

Power

switch*

AC INPUT

MUSIC CENTER

Dual voltage

switch**

*On 220-240V models only; ** On 115/230V dual voltage models only

Note: On 220-240V models only, turn the Acoustimass module POWER switch to on (l).

22

AM271966_00_V.pdf August 18, 2003