Bose 321GS manual Making the connections, Connecting the 321 speakers, Additional cables

English

System Setup

Making the connections

The components of the 3•2•1 and 3•2•1 GS home entertainment systems are connected through the media center, using custom cables supplied with the system. The jacks on the rear of the media center are labeled (Figure 9), to help get everything hooked up right the first time.

Figure 9

Connection panel on the rear of the media center

				AUDIO INPUT			VIDEO	VIDEO	AUDIO	SPEAKERS
		VIDEO 1			VIDEO 2	AUX	INPUT	OUTPUT	OUTPUT
	D		L	L	D	L	C	C	L
75 Ω	AM
FM	LOOP
ANTENNA	ANTENNA	OPTICAL	R	R	D	R		S	R	ACOUSTIMASS MODULE
							S

CAUTION: Do not plug the music system into an AC power (mains) outlet until all the components are connected.

Additional cables

If additional audio cables or longer cables are needed to make these connections, contact

Bose. Before you call, refer to the list of offices included in the product carton.

Connecting the 3•2•1 speakers

1.Insert the single-plug end of the speaker cable into the SPEAKERS connector on the rear panel of the media center (Figure 10). Tighten the screws on either side of the plug.

Figure 10

Connecting the speaker cable to the media center

			AUDIO INPUT			VIDEO	VIDEO	AUDIO	SPEAKERS
	VIDEO			IDEO 2	AUX	INPUT	OUTPUT	OUTPUT
D		L	L	D	L	C	C	L
	OPTICAL	R	R	D	R	S	S	R	MODULE

Speaker cable

2.Grasp the two connectors at the other end of the speaker cable and pull the two strands of cable apart as much as necessary to reach each speaker (Figure 11).

Figure 11

Pulling apart the left and right strands of speaker cable

14

AM271966_00_V.pdf August 18, 2003