Bose 321GS manual Using the sleep timer, Using the radio, Changing CD settings, Tuning

Operation

Changing CD settings

While the system is in CD mode, press the Settings button on the remote control to gain access to the options shown here. For more details on changes you can make to the settings, refer to the Sound Adjustments and System Adjustments sections that follow in this guide.

Selection:	CD setting options:	What the setting affects:
Sleep Timer:	Off	Timer not set.
	mm:ss	Set to turn system off (not the components) when time (01:00 to 90:00
		minutes) expires.
Track:	1 of n	Chooses the CD track by number.
Track Time:	h:mm:ss	Moves to that time/place in the track.
CD Status	selection	Displays information about the CD source.
Audio Setup	selection	See Sound Adjustments page 40.
System Setup	selection	See System Adjustments page 42.

Using the sleep timer

Your system includes a sleep timer which can be set to turn your system off automatically after 1 to 90 minutes of listening to any source. This timer can be accessed through the Settings menu. See “Locating system settings” on page 42.

Note: Remember that system controls, like the sleep timer, will not turn off the TV or other sound source components.

Using the radio

Press or on the remote to select the radio tuner. If the system is off, this will turn it on to the most recently selected station in that band.

Tuning

You can tune to a radio station in the following ways:

If you want to:	Do this:
Switch bands	Press	or	on the remote for the band you want.
Seek the strongest stations	Press and hold Seek			or	on the remote until the
	radio begins seeking. Release to stop at the next strongest
	station.
	To stop sooner, briefly press Seek					or .
	To begin seeking again without holding down the skip
	button, briefly press Seek				or	again as soon as the
	first seek operation stops.
Manually tune to a station	Press Tune		or	on the remote.
Select a preset station	Press Preset
	or
	Press that number on the keypad.

While the system is in AM or FM mode, and the TV is on, you can press the Settings button on the remote control to gain access to the options available for that band. For more details on changes you can make to the settings, refer to the Sound Adjustments and System Adjustments sections that follow in this guide.

English

AM271966_00_V.pdf August 18, 2003

37