B&B Electronics manual CR-25E Start Up Instructions, CR-25E Shut Down Instructions

Page 7

Installation & Operations Manual

 

 

CR-25E Cable Beam Barrier

Installation, Adjustment & Maintenance

6 of 31

1.2CR-25E Start Up Instructions

NOTE:

These instructions assume installation has been completed. If

 

necessary, refer to the enclosed installation instructions.

1.Remove the rear operator door.

2.Connect power by flipping the disconnect switch to the "ON" position.

3.Test operate the barrier to be sure it is functioning properly.

1.3CR-25E Shut Down Instructions

1.Remove the rear operator door.

2.Disconnect power by flipping the disconnect switch to the "OFF" position.

1.4CR-25E Emergency Operation Instructions

1.Remove the rear operator door.

2.Disconnect power by flipping the disconnect switch to the "OFF" position.

3.Locate the hand-crank mounted inside the housing.

4.Slip the hand-crank onto the shaft extending through the brake. The brake will automatically release.

5.Turn the hand-crank to raise or lower the barrier, as needed. A tag on the brake indicates crank direction for opening or closing the barrier. (Clockwise for “Close”, counter clockwise for “Open”).

6.Remove the hand-crank.

7.Flip the disconnect switch back to the "ON" position to resume powered operation.

© 2007 B&B ARMR

WWW.BB-ARMR.COM

(800) 367-0387

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Made in the USA Corporate Technical Support Field Service SupportWelcome IntroductionCorporate Technical Support Service Support How to Contact UsTable of Contents Operating mechanism INSTALLATION, Adjustment and MaintenanceHave been installed HousingCarefully. Consult Factory if Problem is not Found CR-25E Emergency Operation Instructions Necessary, refer to the enclosed installation instructionsCR-25E Start Up Instructions CR-25E Shut Down InstructionsPillow Block Bearings Final drive gear box Low speed housingConnecting Rod Ends Items11 Lubrication Replacement InstructionsLimit Switch Drive Chain Item Recommended Replacement Oils for CR-25E To mount the new assembly To remove the old assemblyMotor Replacement Instructions Disconnect Barrier Power by Throwing Limit Switch Replacement InstructionsMain Power Switch S1 OFF Before Beginning Field Balancing Instructions Indications Problem SolutionCounterweight Sizes Calculating Counterweight RequirementsGate Arm Balancing Instructions Adjusting the Barrier Movement 2007 B&B Armr 800 2007 B&B Armr 800 2007 B&B Armr 800 Specifications Braking Mechanism Limit SwitchTransmission MotorQuality Assurance Safety SWITCHES, Terminal Blocks and WiringEnergy Absorption Cables Cable Anchoring SystemHousing Assembly 0025-0050-A Accessories and Major ComponentsOperator Assembly 0025-0053-B Brake Assembly 0040-0023-C Limit Switch Assembly 0040-0009-F Motor Cut Sheet System Drawings Installation 22’ Clear OpeningInstallation 14’ Clear Opening Wiring Warranty

CR-25E specifications

B&B Electronics CR-25E is a robust and versatile device designed for fulfilling the needs of industrial communication systems. Characterized by its reliability and advanced functionality, the CR-25E is widely recognized in the automation and control sectors.

One of the key features of the CR-25E is its high-speed data transmission capabilities. With support for both RS-232 and RS-485 communication protocols, the device ensures seamless integration across various systems. The CR-25E operates at speeds up to 115.2 Kbps, allowing for rapid data exchange, which is crucial in applications like robotic controls, sensors, and monitoring systems.

Another standout characteristic of the CR-25E is its built-in isolation features. With 2.5 kV isolation on the serial lines, it protects the connected equipment from voltage spikes and noise, significantly enhancing the reliability of the communication link. This isolation effectiveness is particularly valuable in environments rife with electrical interference, as it ensures stable operation and long-lasting performance.

The CR-25E supports multiple power input options, including AC and DC power supplies. This flexibility enables easy integration into existing systems without the need for extensive modifications or additional components. The device also features wide input voltage ranges, thus accommodating different industrial environments and requirements.

In terms of mounting options, the CR-25E is designed with user-friendliness in mind. The compact design and DIN rail compatibility facilitate easy installation in control panels, maximizing space efficiency while maintaining accessible connectivity for maintenance or troubleshooting.

For monitoring and configuration, the CR-25E integrates effortlessly with various industrial software and applications. The device features diagnostic LEDs to provide real-time indications of operational status, simplifying troubleshooting by allowing users to quickly identify issues.

In summary, B&B Electronics CR-25E stands out due to its high-speed data transmission, robust isolation features, versatile power input capabilities, and user-friendly design. These attributes make it a preferred choice among engineers and technicians in the field of industrial communication, ensuring that systems remain efficient, reliable, and effective in demanding operational settings.
Top Page Image Contents