Blaupunkt CDC-RF6IR manual 45’ Installation, Return the carpet to its original

45’ Installation

I

•Confirm that Anti-Vibration Switches on both left and right sides are set to position 45.

•Attach brackets (L) and (R) using the hexagonal bolts (M5 x 8).

•Attach brackets (L) and (R) to their respective brackets (B) using the hexagonal bolts (M6 x 20) and the hexagonal nuts (M6).

•Pull back the carpet and determine where to attach the unit.

•Stick the supplied double-sided tape

to the bottom of the brackets (B) and peel off the paper backing.

•Affix the unit to the floor by pressing in place.

0A • Using a knife, cut Y’s in the carpet directly above the brackets (B) bolts.

• Return the carpet to its original

position allowing the bolts to protrude through.

I

Q • Remove the hexagonal nuts and take off the changer.

e • Once more, use the hexagonal nuts to attach the changer on top of the carpet.

10