Blaupunkt CDC-RF6IR manual Vertical Installation

Page 9

Vertical Installation

onfinn that Anti-Vibration Switches on both left and right sides are set to position V,

•Attach brackets (L) and (R) using the hexagonal bolts (M5 x 8).

•Attach brackets (L) and (R) to their respective brackets (B) using the hexagonal bolts (M6 x 20) and the hexagonal nuts (MS).

•Pull back the carpet and determine where to attach the unit.

•Stick the supplied double-sided tape

to the bottom of the brackets (B) and peel off the paper backing.

•Affix the unit to the floor by pressing in place.

• Once more, use the hexagonal nuts to attach the changer on top of the

Image 9

Contents RF6ir FCC Warning Owner’s RecordTable of Contents General Recommendations FeaturesReset Button Before Installation and TestingSetting the Radio Frequency Transport Lock ScwwsOutput Electrical ConnectionsAnti-Vibration Setting Type of InstallationRecommendations Where to attach the unit Take off the changer Horizontal InstallationRight sides are set to position H CarpetVertical Installation Return the carpet to its original 45’ InstallationInstallation of the Controller Sumended InstallationChanger Specifications Installation of the FM ModulatorCleaning Discs Magazine & Compact DiscsLoading a Disc Location of Controls Operating Instructions Switching To Radio Or Tape Optional Wireless Remote ControlTroubleshooting Guide Cause Remedy Error CodesBlaupunkt