English
Inspection and repairs
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Electrical safety
This product must be earthed.
Always check that the power supply corresponds to the voltage on the rating plate
Power plugs must match the outlet. Never modify the plug in any way. Do not use any adaptor plugs with earthed (Class l) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Never operate an appliance directly below the
Do not insert any object into the openings on the outer case.
Extension cables & Class l product
•A
•Up to 30m (100 ft) can be used without loss of power.
•If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.
Features (Fig. A)
1Control panel
2Turntable shaft
3Roller support
4Glass tray
5Observation window
6Door
7Safety interlock system
8Door Handle
•Remove all packaging from the appliance.
•Mica Plate, Do not remove
•Inspect the oven after unpacking for any damage such as a misaligned or damaged door, dents or holes in the door window and screen, and any dents in the cavity. If any of these are seen, DO NOT use the oven.
•Clean the appliance before first use.
Assembly (Fig. B)
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
•Place the appliance on a flat, even surface.
•Open the door (6) & place the stem into the hole in the cavity base.
•Place the roller support (3) into the hole in the cavity.
•Align the glass tray (4) on top of the roller support.
•Connect the appliance to a suitable electrical supply.