Hobart Q Series manual Maintenance, Troubleshooting, Cleaning, Warranty

Page 12

MAINTENANCE

CLEANING

Cabinet

Clean the inside of the cabinet and the doors weekly with a warm water solution of mild household liquid dishwashing detergent (such as Palmolive green or Ivory). Do not use anything containing grit, abrasive materials, bleach or harsh chemicals. Be cautious with new or improved formulas; use only after being well tested. Rinse thoroughly and dry with a clean soft cloth.

Gaskets

Door gaskets should be cleaned weekly using a warm water solution of mild household liquid dishwashing detergent (such as Palmolive green or Ivory). Never allow gaskets to contact concentrated cleaners or disinfectants. This can cause premature failure of the gasket material.

Condenser Coil

WARNING: DISCONNECT ELECTRICAL POWER SUPPLY BEFORE CLEANING THE CONDENSING UNIT.

Check the condenser coil weekly. This surface must be kept free of dirt and grease for proper system operation. Remove the front trim panel and carefully vacuum or brush dirt and lint from the condenser coil. Replace the trim panel.

Evaporator Coil, Drain Pan, Condensate Loop and Condensate Dish

When needed, flush these components with fresh water. This should be a part of any routine maintenance program and can prolong the life of the equipment.

Light Bulb Replacement (when equipped)

Replace light bulb(s) with 40 watt incandescent appliance type bulb(s) ONLY. The protective cover can easily be removed and replaced.

Florescent Light Bulb Replacement (when equipped)

Remove protective cover. Replace florescent tube with same size and type: 40 watt, 48" long.

 

TROUBLESHOOTING

SYMPTOM

POSSIBLE CAUSE

Unit fails to operate.

Power failure.

 

Plug loose in receptacle.

 

Blown fuse or tripped circuit breaker.

 

If a freezer model is in a deftost cycle, wait 30 minutes and recheck.

 

Check the Temperature Control (page 5 or 6) to make sure it is not OFF.

 

If the suggestions above fail to remedy the situation, contact service.

WARRANTY

The Q series cabinet warranty is for two years. It includes parts, labor and travel during normal working hours in the continental United States. The non-prorated compressor warranty is for an additional three years and does not include labor.

For additional information or to discuss a maintenance program, contact your local authorized refrigeration servicer.

FORM 14580 Rev. L (Jan. 2002)

– 12 –

PRINTED IN U.S.A.

 

Page 11 Page 12
Image 12
Page 11 Page 12
Contents RU C T I O Installation Unpacking and AssemblyLocation Assembly Door HingingLegs or Casters Casters FigShelves Fig Utility Base OptionalOperation Compressor MountsCondensate Evaporator Prestart ChecksDisconnect Power AT the Source to Electronic Defrost Timer when equipped Programming the Electronic Defrost TimerSetting the Time Clock to the Current Time-of-Day Setting the Defrost DurationHow to Set a Custom Defrost Schedule Cancelling a Defrost Cycle Program ReviewInitiating a Manual Defrost If the Defrost Timers Battery Loses Power Mechanical Defrost Timer FigMaintenance TroubleshootingCleaning Warranty

Q Series specifications

The Hobart Q Series is a highly advanced line of commercial dishwashers designed to meet the rigorous demands of high-volume kitchens and foodservice establishments. Known for its efficiency, reliability, and innovative features, the Q Series sets a new standard in warewashing technology.

One of the standout features of the Hobart Q Series is its user-friendly control panel. The interface is intuitive, allowing operators to navigate settings quickly, ensuring that even less experienced staff can operate the machine with ease. The digital display provides real-time information about the wash cycle status, making it easier to monitor operations.

Energy efficiency is at the forefront of the Q Series design. These dishwashers are engineered to use less water and energy compared to traditional models, which not only reduces operational costs but also minimizes the environmental impact. The innovative design incorporates smart technology that adjusts water and energy consumption based on the load size and type, ensuring optimal performance without waste.

Another key characteristic of the Hobart Q Series is its robust construction. Built from high-quality stainless steel, the units are designed for durability and longevity, capable of withstanding the rigors of daily use in busy kitchens. The materials used in the construction also make the dishwashers easy to clean and maintain, promoting a hygienic environment.

The Q Series features advanced wash technologies, including multiple wash cycles that can be tailored to specific cleaning needs. These cycles include options for delicate glassware, heavily soiled pots and pans, and everything in between. The powerful wash arms ensure thorough cleaning, while the patented fresh water rinse system guarantees that dishes come out spotless and sanitized.

Safety and compliance are also integral to the Q Series. The dishwashers include built-in safety features to prevent overflow and ensure proper drainage, along with advanced filtration systems that keep wash water clean. This is crucial for maintaining health and safety standards in foodservice operations.

With its innovative design, energy efficiency, durability, and advanced cleaning technology, the Hobart Q Series stands out as an ideal solution for any commercial kitchen looking to streamline its warewashing process. Whether it's a fast-paced restaurant, a catering service, or any establishment requiring high-volume dishwashing, the Q Series provides reliability and outstanding performance, making it a valuable investment for foodservice operations.
Top Page Image Contents