Xantech MRC88M, MRAUDIO8X8M installation instructions Starting a Project

Page 38

Page: 38

Model MRC88m / MRAUDIO8x8m

4. Click Next to continue.

The proper drivers should now be installed.

Normally you would use Com Port 1 (USB will usually appear as COM 3 or above), but if it is already in use, it will be necessary to use a different one (use the DB9-to-DB25 adapter if necessary). Select the Com Port as follows:

1.Click Preferences from the File menu or simply press F2 on your keyboard

2.Click on an available port, then OK.

.

VERIFYING COM PORT COMMUNICATION (“Who Am I” Base Unit Version Verification)

Before continuing, it is recommended to verify proper COM PORT communication between the PC and the MRC88m. By checking the units Firmware versions and verifying a response from the MRC88m, you will confirm proper communication and may continue.

1.Power the Unit ON and allow to boot to steady state (all front staus LED’s OFF)

2.Click on the Base Unit Menu and select Who Am I?

3.This will open a window labeled Base Unit Version Query. Click Next to proceed.

4.This should return a listing of the Base Unit Firmware Version as well as the Keypad Firmware Versions.

5.Click Finish to complete the verification

Note: If a message is returned stating: “Communication error. Not able to establish link with MRC Unit” this could be due to the following:

1.The Unit is not powered ON. Please check the AC Power Cable and power state of the unit.

2.There is a communication error between the PC and the MRC88m Controller/Amplifier. Please verify the DB9 or USB cable is properly connected to the unit and there are no Com Port conflicts in your PC.

3.You have selected the wrong Com Port. Select the proper setting in the Preference Menu.

4.For further COM Port troubleshooting, please see Application Advisory AA-08 located at www.xantech.com in the Application Advisory section of the web site.

STARTING A PROJECT

With the DragMRC software open and the COM PORT communication verified proceed as follows:

1.Under the User Settings Menu, select whether this project will be created in BASIC or ADVANCED mode. Refer to the BASIC and ADVANCED descriptions listed under the Section 3 title heading. NOTE: Projects created in BASIC mode may be changed from BASIC to ADVANCED at any time during editing retaining all current settings, BUT a project created in ADVANCED mode cannot be changed to BASIC mode.

NOTE: For EXPANDED systems, select ADVANCED mode under the User Settings menu.

2.From the File menu choose “NEW PROJECT” (CTL+N) or choose “OPEN PROJECT” (CTL+O) to modify an existing project file.

3.In the New Project window, type a file name such as “joneshome” and click “SAVE”. The proper file extension is added automatically.

4.Under the Base Unit menu, select MRC88m (Setup Environment)

5.The MRC88m System Window will appear. Depending upon which mode was selected in step 1,

(BASIC or ADVANCED), the System Window will offer different TAB’s for system configuration. See Figure 14 & 15 below.

© 2009 Xantech Corporation

Page 37 Page 39
Image 38
Page 37 Page 39
Contents Model MRC88m Model MRAUDIO8x8m Safety Instructions Read Before Operating Equipment Not Expose this Appliance to Rain or MoistureTable of Contents Programming the Controller ADVANCED/EXPANDED Programming Tweaking the System Model MRC88m / MRAUDIO8x8m Xantech Corporation General Information MRC88m system includes the following componentsModel MRC88m / MRAUDIO8x8m System Block Diagram System OverviewCONTROLLER/AMPLIFIER Features Keypad Features Front Panel MRC88M Front Panel Features and ConnectionsSystem Status Power-Up Mode Zone Status Active-Operational Mode MRC88M Rear Panel Features and Connections Source Component Input ConnectionsSource Loop-Thru Connections MRC88M Keypad Front Features MRC88m KeypadModel MRC88m / MRAUDIO8x8m Model MRC88m Keypad Rear Panel Features and Functions MRC88M Keypad Rear Features and ConnectionsInstallation Operation OUT-OF-THE-BOX PRE Test BASIC/ADVANCED/EXPANDEDMRC88 Mounting and Installing the MRC88m Keypad ExpandedMRC88m Keypad mounting template Optional Keypad Back-Box for pre-install applications MRC88M Keypad RemovalVideo Connections MRC88m Only Audio ConnectionsBASIC/ADVANCED CSM1 Threshold Adjustments AdvancedZone Related Wiring Connections BASIC/ADVANCED/EXPANDEDStatus BASIC/ADVANCED/EXPANDED Composite VideoModulated Video Zone IR BASIC/ADVANCED/EXPANDED Control OutCO1 and CO2 Zones 7 Connections AT the Zone Location BASIC/ADVANCED/EXPANDED OFFZone Expansion Connecting TWO MRC88M Controllers Expanded Zone IRMRC88m Connecting Block located on rear of Keypad MRC88m Keypad CAT5 Cable LengthsVideo Connections SETTING-UP the MRC88m System Pre-Programming the MRC88m BASIC/ADVANCED/EXPANDED Computer Requirements Minimum Basic Mode Advanced Mode Expanded ModePlanning the System Included Hardware & Software Items Connecting the MRC88M CONTROLLER/AMPLIFIER to the PCSoftware Installation Starting MRC88M Dragon DROP-IR SoftwareStarting a Project Learning IR Commands Creating Palette Files BUILT-IN IR Code Library BASIC/ADVANCED/EXPANDEDBuilt-In Mfg’s IR Command Library Learning IR Commands BASIC/ADVANCED/EXPANDEDRecording Toggle Command Functions Creating a Palette File BASIC/ADVANCED/EXPANDED To Rename an Existing FunctionTo Add a New Function Importing CCF Files Getting Source Commands from the InternetEditing BRAND, COMPONENT, and Function Lists Importing Discrete IR Hex Codes Entering RS232 Command Strings ADVANCED/EXPANDEDRS232 Palette Editor Window Using PC TestUsing MRC88m Test Creating AN RS232 Palette File ADVANCED/EXPANDED Creating an RS232 Palette FileProgramming The Controller Downloading Source Icons to the Keypad Creating NEW IconsSelecting Icons from the Icon Generator Selecting Internal Amplifier Commands ADVANCED/EXPANDED Placing Commands Onto the Virtual KeypadSelecting RS232 Command Palettes ADVANCED/EXPANDED Placing Commands on the Virtual Keypad BasicProgramming Sequences Macros Button Edit Pop-Up Menu Editing Buttons on the Virtual KeypadEditing Commands in the Macro Command List Window Editing Commands Zone 1 thruProgramming Power Management and Sense Trigger Codes Programming Power ManagementBasic Power Management Programming Sense Trigger Codes ADVANCED/EXPANDED Programming Sense TriggersTesting Commands Under Power Management and Sense Triggers Name of Zone ADVANCED/EXPANDED Zone Options ConfigurationDefault settings set in Basic Mode are as follows RC68 Code GroupPRE AMP Volume Adjust Settings ADVANCED/EXPANDED IR Loop Back Settings ADVANCED/EXPANDEDConfiguring Commands for IR in Zone Transferring the ProjectController Options Programming Zone Audio InputBACK-LIGHT Control Mode of OperationIR Routing Expanded OptionsRS232 Settings Monitor Lockout Mode Factory default DisabledMonitor Lockout Mode Zone Linking Programming Dynamic Zone Link Mode Factory default Disabled Link ALL Static RS232 Input TranslatorLink ALL Dynamic Clear ALLProgramming IR Commands and Sequences IRS232 Input TranslatorRC68 IR Command Macro Window RC68+ IR Code Triggered SequencerProgramming Internal Amplifier Commands Internal Amplifier Command WindowUsing Internal Amplifier Commands Zone Expansion Connecting Multiple MRC88M Controllers Internal Amplifier CommandsPhysical Connections in Expanded Mode Programming in Expanded ModeEnabling Expanded Mode RS232 Control While in Expanded Mode Sources 1 through Completing the Programming Process Saving and BACKING-UP Files Cold Firmware Upgrade Firmware Upgrade OptionsWarm Firmware Upgrade Downloading Firmware Files from the WEBTweaking the System Making Fine Adjustments Trimming Source Audio Input LevelsZone Adjustments Keypad AdjustmentsAccessing Tier 2 Commands Powering the Zone on and OFFSetting the Volume Source Slection and ControlSystem Status BASIC/ADVANCED Zone SettingsAudio Adjustments BASIC/ADVANCED/EXPANDED Dynamic Monitor Lockout Parental Control ADVANCED/EXPANDEDExpanded RS232 Control ?5SS3+ 7PR1+?5SS+ Commands AO+Queries ?z#PR+Volume Level 39 Steps Keypad Button ID MRC88m Setting Level in dB +14 +12 +10 MRC88m Left Speaker Right Speaker Attenuation Setting Balance LevelTroubleshooting Problem Probable Cause and SolutionModel MRC88m / MRAUDIO8x8mPage 96Model MRC88m / MRAUDIO8x8m Problem Probable Cause and Solution RS232 and Expansion PIN OUT Information Video SpecificationsCertifications IR SensorModel MRC88m / MRAUDIO8x8m Model MRC88m / MRAUDIO8x8m Xantech Corporation Xantech Corporation
Related manuals
Manual 7 pages 32.14 Kb Manual 10 pages 43.55 Kb Manual 12 pages 31.84 Kb

MRAUDIO8X8M, MRC88M specifications

The Xantech MRC88M is a sophisticated multi-room audio system that seamlessly integrates into modern home environments, offering unparalleled control and quality of sound distribution. Designed for audiophiles and casual listeners alike, this powerful system enables users to enjoy their favorite music, podcasts, and audio from multiple sources throughout their home.

One of the standout features of the MRC88M is its 8-zone capability, allowing users to create and control up to eight independent audio zones. Each zone can customize its volume, source selection, and audio settings, providing a highly personalized audio experience. This flexibility means that different rooms can enjoy varied audio at the same time, making it ideal for entertaining guests or relaxing in private spaces.

The MRC88M employs advanced technologies to ensure high-quality sound reproduction. It uses a reliable audio matrix router that allows for the precise routing of audio signals between connected sources and zones. This ensures minimal interference and maximum clarity, making the listening experience rich and immersive. The system supports multiple source components, including CD players, streaming devices, and more, ensuring compatibility with a variety of audio formats.

Another key characteristic of the MRC88M is its user-friendly interface. Users can control the system using an intuitive remote, mobile app, or wall-mounted keypads, allowing for easy operation regardless of the user’s technical expertise. The customizable interfaces enable users to tailor the controls to meet individual preferences, enhancing the ease of use throughout the home.

Integration with smart home systems is another significant advantage of the MRC88M. It supports control via popular platforms, which allows homeowners to incorporate their audio system into broader home automation settings. This connectivity enables voice control and advanced scheduling features, making it not only a multi-room audio solution but also a vital part of a smart home ecosystem.

The MRC88M also features robust build quality and supports a wide range of speaker configurations, ensuring that it can accommodate both in-wall and traditional speakers. This versatility makes it suitable for any living space, whether in a new build or retrofitted into an existing residence.

In conclusion, the Xantech MRC88M is a top-tier multi-room audio solution that combines high-quality sound, flexible zone control, and seamless integration into smart home systems. Its advanced technology and user-friendly design make it a perfect choice for those looking to elevate their audio experience throughout their home.
Top Page Image Contents