Xantech MRAUDIO8X8M, MRC88M Programming Power Management and Sense Trigger Codes

Page 55

Model MRC88m / MRAUDIO8x8m

Page: 55

DELETE

(BASIC/ADVANCED/EXPANDED)

Highlighting a single command in the Macro Command List and selecting Delete from the pop-up menu will remove the command from the Macro Command List.

TESTING COMMANDS PLACED ON THE VIRTUAL KEYPAD

Commands placed under buttons in the Virtual Keypad window may be tested prior to downloading to the MRC88m Controller. To test commands, the Dragon PC must be connected to the front panel COM PORT or USB Port and emitters must be placed in the proper Source and Zone IR Emitter output ports. For Fast Testing, an emitter placed in the COMMON IR port will be sufficient.

1.Select the appropriate button on the Virtual Keypad with the IR codes placed under it to test. (i.e. The PLAY button:). The button should be outlined in blue.

2.Select the TEST button located in the bottom right-hand side of the Virtual Keypad window. Commands listed under the Macro Command List for that selected Command should now be executed in order of appearance out of the proper Ports on the MRC88m Controller.

PROGRAMMING POWER MANAGEMENT AND SENSE TRIGGER CODES

The MRC88m has the ability to control and manage all of the source components connected to the system keeping all components powered ON when any zone is active and to turn all components OFF 10 seconds after the last Zone is powered down (Power Management feature). The MRC88m also polls these components continuously, checking the power state every 10 seconds and comparing it to the system just in case a component gets out of sequence such as during power surges or other miss-happenings.

The MRC88m Controller features two sensing methods. One is Video Sensing (Available on MRC88m Only). All eight source video inputs are set to detect a video input signal (NTSC and PAL sync). When video is detected, the MRC88m controller knows when to send or not send power commands to keep components in sync with system activity. The other method is Current Sensing. Current Sensing functions the same way, but detects the difference in current drawn by the component when it’s either ON or OFF(Standby Mode). Current Sensing requires the use of the CSM1 Current Sense Module (not included).

In ADVANCED mode, the system also has the ability to trigger Command Macros with a power state (i.e. change a lighting scene when a device is turned on). This is called Sense Trigger.

Programming for these two features is explained below.

PROGRAMMING POWER MANAGEMENT

Power Management operates by checking all Zones Power ON/OFF status of the MRC88m System and comparing it to the Power ON/OFF state of the Source Components. If the two states disagree the Controller will send out the appropriate Power Command to the source Component until they are the same (If any Zone of the MRC88m System is ON it will make sure all Components listed under Power Management are also ON).

[One or More Zones ON] AND [Source Component OFF] = Issue IR command listed under POWER ON in the Power Management Window to Source Emitter Port

[One or More zones ON] AND [Source Component ON] = Do nothing.

[All Zones Off] AND [Source Component ON] = Issue IR command listed under POWER OFF in the Power Management window to Source Emitter Port

[All Zones Off] AND [Source Component Off] = Do nothing.

NOTE: IR commands issued for power management will be output from the corresponding source IR and common IR outputs.

© 2009 Xantech Corporation

Image 55
Contents Model MRC88m Model MRAUDIO8x8m Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents Programming the Controller ADVANCED/EXPANDED Programming Tweaking the System Model MRC88m / MRAUDIO8x8m Xantech Corporation MRC88m system includes the following components General InformationModel MRC88m / MRAUDIO8x8m System Overview System Block DiagramCONTROLLER/AMPLIFIER Features Keypad Features System Status Power-Up Mode MRC88M Front Panel Features and ConnectionsFront Panel Zone Status Active-Operational Mode Source Component Input Connections MRC88M Rear Panel Features and ConnectionsSource Loop-Thru Connections MRC88m Keypad MRC88M Keypad Front FeaturesModel MRC88m / MRAUDIO8x8m MRC88M Keypad Rear Features and Connections Model MRC88m Keypad Rear Panel Features and FunctionsOperation OUT-OF-THE-BOX PRE Test BASIC/ADVANCED/EXPANDED InstallationMRC88 Expanded Mounting and Installing the MRC88m KeypadMRC88m Keypad mounting template MRC88M Keypad Removal Optional Keypad Back-Box for pre-install applicationsBASIC/ADVANCED Audio ConnectionsVideo Connections MRC88m Only Advanced CSM1 Threshold AdjustmentsBASIC/ADVANCED/EXPANDED Zone Related Wiring ConnectionsModulated Video BASIC/ADVANCED/EXPANDED Composite VideoStatus CO1 and CO2 Zones 7 Control OutZone IR BASIC/ADVANCED/EXPANDED OFF Connections AT the Zone Location BASIC/ADVANCED/EXPANDEDZone IR Zone Expansion Connecting TWO MRC88M Controllers ExpandedMRC88m Keypad CAT5 Cable Lengths MRC88m Connecting Block located on rear of KeypadVideo Connections SETTING-UP the MRC88m System Pre-Programming the MRC88m Planning the System Basic Mode Advanced Mode Expanded ModeBASIC/ADVANCED/EXPANDED Computer Requirements Minimum Starting MRC88M Dragon DROP-IR Software Connecting the MRC88M CONTROLLER/AMPLIFIER to the PCSoftware Installation Included Hardware & Software ItemsStarting a Project BUILT-IN IR Code Library BASIC/ADVANCED/EXPANDED Learning IR Commands Creating Palette FilesLearning IR Commands BASIC/ADVANCED/EXPANDED Built-In Mfg’s IR Command LibraryRecording Toggle Command Functions To Add a New Function To Rename an Existing FunctionCreating a Palette File BASIC/ADVANCED/EXPANDED Editing BRAND, COMPONENT, and Function Lists Getting Source Commands from the InternetImporting CCF Files Importing Discrete IR Hex Codes ADVANCED/EXPANDED Entering RS232 Command StringsUsing MRC88m Test Using PC TestRS232 Palette Editor Window Creating an RS232 Palette File Creating AN RS232 Palette File ADVANCED/EXPANDEDProgramming The Controller Selecting Icons from the Icon Generator Creating NEW IconsDownloading Source Icons to the Keypad Placing Commands on the Virtual Keypad Basic Placing Commands Onto the Virtual KeypadSelecting RS232 Command Palettes ADVANCED/EXPANDED Selecting Internal Amplifier Commands ADVANCED/EXPANDEDProgramming Sequences Macros Editing Buttons on the Virtual Keypad Button Edit Pop-Up MenuEditing Commands in the Macro Command List Window Zone 1 thru Editing CommandsProgramming Power Management Programming Power Management and Sense Trigger CodesBasic Power Management Programming Sense Triggers Programming Sense Trigger Codes ADVANCED/EXPANDEDTesting Commands Under Power Management and Sense Triggers RC68 Code Group Zone Options ConfigurationDefault settings set in Basic Mode are as follows Name of Zone ADVANCED/EXPANDEDIR Loop Back Settings ADVANCED/EXPANDED PRE AMP Volume Adjust Settings ADVANCED/EXPANDEDTransferring the Project Configuring Commands for IR in ZoneZone Audio Input Controller Options ProgrammingExpanded Options Mode of OperationIR Routing BACK-LIGHT ControlMonitor Lockout Mode Factory default Disabled RS232 SettingsMonitor Lockout Mode Zone Linking Programming Dynamic Zone Link Mode Factory default Disabled Clear ALL RS232 Input TranslatorLink ALL Dynamic Link ALL StaticIRS232 Input Translator Programming IR Commands and SequencesRC68+ IR Code Triggered Sequencer RC68 IR Command Macro WindowInternal Amplifier Command Window Programming Internal Amplifier CommandsUsing Internal Amplifier Commands Internal Amplifier Commands Zone Expansion Connecting Multiple MRC88M ControllersEnabling Expanded Mode Programming in Expanded ModePhysical Connections in Expanded Mode RS232 Control While in Expanded Mode Sources 1 through Completing the Programming Process Saving and BACKING-UP Files Downloading Firmware Files from the WEB Firmware Upgrade OptionsWarm Firmware Upgrade Cold Firmware UpgradeTweaking the System Trimming Source Audio Input Levels Making Fine AdjustmentsKeypad Adjustments Zone AdjustmentsSource Slection and Control Powering the Zone on and OFFSetting the Volume Accessing Tier 2 CommandsDynamic Monitor Lockout Parental Control ADVANCED/EXPANDED Zone SettingsAudio Adjustments BASIC/ADVANCED/EXPANDED System Status BASIC/ADVANCEDExpanded RS232 Control ?5SS+ 7PR1+?5SS3+ AO+ Commands?z#PR+ QueriesVolume Level 39 Steps Keypad Button ID MRC88m Setting Level in dB +14 +12 +10 Balance Level MRC88m Left Speaker Right Speaker Attenuation SettingProblem Probable Cause and Solution TroubleshootingModel MRC88m / MRAUDIO8x8mPage 96Model MRC88m / MRAUDIO8x8m Problem Probable Cause and Solution RS232 and Expansion PIN OUT Information IR Sensor SpecificationsCertifications VideoModel MRC88m / MRAUDIO8x8m Model MRC88m / MRAUDIO8x8m Xantech Corporation Xantech Corporation
Related manuals
Manual 7 pages 32.14 Kb Manual 10 pages 43.55 Kb Manual 12 pages 31.84 Kb

MRAUDIO8X8M, MRC88M specifications

The Xantech MRC88M is a sophisticated multi-room audio system that seamlessly integrates into modern home environments, offering unparalleled control and quality of sound distribution. Designed for audiophiles and casual listeners alike, this powerful system enables users to enjoy their favorite music, podcasts, and audio from multiple sources throughout their home.

One of the standout features of the MRC88M is its 8-zone capability, allowing users to create and control up to eight independent audio zones. Each zone can customize its volume, source selection, and audio settings, providing a highly personalized audio experience. This flexibility means that different rooms can enjoy varied audio at the same time, making it ideal for entertaining guests or relaxing in private spaces.

The MRC88M employs advanced technologies to ensure high-quality sound reproduction. It uses a reliable audio matrix router that allows for the precise routing of audio signals between connected sources and zones. This ensures minimal interference and maximum clarity, making the listening experience rich and immersive. The system supports multiple source components, including CD players, streaming devices, and more, ensuring compatibility with a variety of audio formats.

Another key characteristic of the MRC88M is its user-friendly interface. Users can control the system using an intuitive remote, mobile app, or wall-mounted keypads, allowing for easy operation regardless of the user’s technical expertise. The customizable interfaces enable users to tailor the controls to meet individual preferences, enhancing the ease of use throughout the home.

Integration with smart home systems is another significant advantage of the MRC88M. It supports control via popular platforms, which allows homeowners to incorporate their audio system into broader home automation settings. This connectivity enables voice control and advanced scheduling features, making it not only a multi-room audio solution but also a vital part of a smart home ecosystem.

The MRC88M also features robust build quality and supports a wide range of speaker configurations, ensuring that it can accommodate both in-wall and traditional speakers. This versatility makes it suitable for any living space, whether in a new build or retrofitted into an existing residence.

In conclusion, the Xantech MRC88M is a top-tier multi-room audio solution that combines high-quality sound, flexible zone control, and seamless integration into smart home systems. Its advanced technology and user-friendly design make it a perfect choice for those looking to elevate their audio experience throughout their home.