Xantech MRAUDIO8X8M, MRC88M Creating AN RS232 Palette File ADVANCED/EXPANDED

Page 47

Model MRC88m / MRAUDIO8x8m

Page: 47

the proper Com Port is selected of the DragMRC PC for communicating with the MRC88m Controller/Amplifier)

4.Click on the command string to be tested on the left-hand side of the RS232 Palette Editor. Note:

Only commands with the icon will be able to be tested.

5.The Device or Component connected should respond accordingly. If not, check the command string entered and port settings in the Test RS232 Settings window. If still having problems see the Trouble Shooting section to verify RS232 communication.

6.Test all Command Stings in this fashion before placing into a Palette File.

CREATING AN RS232 PALETTE FILE (ADVANCED/EXPANDED)

A Palette File is a file of learned commands that is ready to be placed onto the Virtual Keypads for use in the MRC88m system. These files can be shared with all future versions of Dragon Drop-IR™ Software for use with any Dragon programmable Xantech product capable of issuing RS232 commands. Therefore the procedure of learning and testing these commands and creating the Palette file for an individual source component only needs to be done once. This file can now be added to a library of files that you create or download from our web site and used at any time in the future for later projects.

1.After Dragon has learned the commands for that Source, select “ADD>>”. The ADD button text will turn red.

2.Click on a function (i.e. POWER) to be added to the palette. A “NEW PALETTE” window will open. Type in a file name (i.e. SONY-DSS) and click “SAVE”. (Also note this file name in the IR Filename area of the PLANNING THE SYSTEM section above. Check the box labeled ‘Palette’.)

3.“POWER” will appear in the right-hand side of the Palette Editor window with the icon.

4.Click on all functions to be added to SONY-DSS RS232 Command Palette

5.Click the “CLOSE” button on Palette Editor. Palette Editor will close. SONY-DSS.RSL will be saved to the hard drive.

6.Repeat steps 1-9 in ‘Using the RS232 Palette Editor’ and steps 1-5 in ‘Creating an RS232 Palette File’ for all components to be used with MRC88m.

Figure 23: Creating an RS232 Palette File

© 2009 Xantech Corporation

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Model MRC88m Model MRAUDIO8x8m Not Expose this Appliance to Rain or Moisture Safety Instructions Read Before Operating EquipmentTable of Contents Programming the Controller ADVANCED/EXPANDED Programming Tweaking the System Model MRC88m / MRAUDIO8x8m Xantech Corporation MRC88m system includes the following components General InformationModel MRC88m / MRAUDIO8x8m System Overview System Block DiagramCONTROLLER/AMPLIFIER Features Keypad Features Front Panel MRC88M Front Panel Features and ConnectionsSystem Status Power-Up Mode Zone Status Active-Operational Mode Source Component Input Connections MRC88M Rear Panel Features and ConnectionsSource Loop-Thru Connections MRC88m Keypad MRC88M Keypad Front FeaturesModel MRC88m / MRAUDIO8x8m MRC88M Keypad Rear Features and Connections Model MRC88m Keypad Rear Panel Features and FunctionsOperation OUT-OF-THE-BOX PRE Test BASIC/ADVANCED/EXPANDED InstallationMRC88 Expanded Mounting and Installing the MRC88m KeypadMRC88m Keypad mounting template MRC88M Keypad Removal Optional Keypad Back-Box for pre-install applicationsVideo Connections MRC88m Only Audio ConnectionsBASIC/ADVANCED Advanced CSM1 Threshold AdjustmentsBASIC/ADVANCED/EXPANDED Zone Related Wiring ConnectionsStatus BASIC/ADVANCED/EXPANDED Composite VideoModulated Video Zone IR BASIC/ADVANCED/EXPANDED Control OutCO1 and CO2 Zones 7 OFF Connections AT the Zone Location BASIC/ADVANCED/EXPANDEDZone IR Zone Expansion Connecting TWO MRC88M Controllers ExpandedMRC88m Keypad CAT5 Cable Lengths MRC88m Connecting Block located on rear of KeypadVideo Connections SETTING-UP the MRC88m System Pre-Programming the MRC88m BASIC/ADVANCED/EXPANDED Computer Requirements Minimum Basic Mode Advanced Mode Expanded ModePlanning the System Starting MRC88M Dragon DROP-IR Software Connecting the MRC88M CONTROLLER/AMPLIFIER to the PCSoftware Installation Included Hardware & Software ItemsStarting a Project BUILT-IN IR Code Library BASIC/ADVANCED/EXPANDED Learning IR Commands Creating Palette FilesLearning IR Commands BASIC/ADVANCED/EXPANDED Built-In Mfg’s IR Command LibraryRecording Toggle Command Functions Creating a Palette File BASIC/ADVANCED/EXPANDED To Rename an Existing FunctionTo Add a New Function Importing CCF Files Getting Source Commands from the InternetEditing BRAND, COMPONENT, and Function Lists Importing Discrete IR Hex Codes ADVANCED/EXPANDED Entering RS232 Command StringsRS232 Palette Editor Window Using PC TestUsing MRC88m Test Creating an RS232 Palette File Creating AN RS232 Palette File ADVANCED/EXPANDEDProgramming The Controller Downloading Source Icons to the Keypad Creating NEW IconsSelecting Icons from the Icon Generator Placing Commands on the Virtual Keypad Basic Placing Commands Onto the Virtual KeypadSelecting RS232 Command Palettes ADVANCED/EXPANDED Selecting Internal Amplifier Commands ADVANCED/EXPANDEDProgramming Sequences Macros Editing Buttons on the Virtual Keypad Button Edit Pop-Up MenuEditing Commands in the Macro Command List Window Zone 1 thru Editing CommandsProgramming Power Management Programming Power Management and Sense Trigger CodesBasic Power Management Programming Sense Triggers Programming Sense Trigger Codes ADVANCED/EXPANDEDTesting Commands Under Power Management and Sense Triggers RC68 Code Group Zone Options ConfigurationDefault settings set in Basic Mode are as follows Name of Zone ADVANCED/EXPANDEDIR Loop Back Settings ADVANCED/EXPANDED PRE AMP Volume Adjust Settings ADVANCED/EXPANDEDTransferring the Project Configuring Commands for IR in ZoneZone Audio Input Controller Options ProgrammingExpanded Options Mode of OperationIR Routing BACK-LIGHT ControlMonitor Lockout Mode Factory default Disabled RS232 SettingsMonitor Lockout Mode Zone Linking Programming Dynamic Zone Link Mode Factory default Disabled Clear ALL RS232 Input TranslatorLink ALL Dynamic Link ALL StaticIRS232 Input Translator Programming IR Commands and SequencesRC68+ IR Code Triggered Sequencer RC68 IR Command Macro WindowInternal Amplifier Command Window Programming Internal Amplifier CommandsUsing Internal Amplifier Commands Internal Amplifier Commands Zone Expansion Connecting Multiple MRC88M ControllersPhysical Connections in Expanded Mode Programming in Expanded ModeEnabling Expanded Mode RS232 Control While in Expanded Mode Sources 1 through Completing the Programming Process Saving and BACKING-UP Files Downloading Firmware Files from the WEB Firmware Upgrade OptionsWarm Firmware Upgrade Cold Firmware UpgradeTweaking the System Trimming Source Audio Input Levels Making Fine AdjustmentsKeypad Adjustments Zone AdjustmentsSource Slection and Control Powering the Zone on and OFFSetting the Volume Accessing Tier 2 CommandsDynamic Monitor Lockout Parental Control ADVANCED/EXPANDED Zone SettingsAudio Adjustments BASIC/ADVANCED/EXPANDED System Status BASIC/ADVANCEDExpanded RS232 Control ?5SS3+ 7PR1+?5SS+ AO+ Commands?z#PR+ QueriesVolume Level 39 Steps Keypad Button ID MRC88m Setting Level in dB +14 +12 +10 Balance Level MRC88m Left Speaker Right Speaker Attenuation SettingProblem Probable Cause and Solution TroubleshootingModel MRC88m / MRAUDIO8x8mPage 96Model MRC88m / MRAUDIO8x8m Problem Probable Cause and Solution RS232 and Expansion PIN OUT Information IR Sensor SpecificationsCertifications VideoModel MRC88m / MRAUDIO8x8m Model MRC88m / MRAUDIO8x8m Xantech Corporation Xantech Corporation
Related manuals
Manual 7 pages 32.14 Kb Manual 10 pages 43.55 Kb Manual 12 pages 31.84 Kb

MRAUDIO8X8M, MRC88M specifications

The Xantech MRC88M is a sophisticated multi-room audio system that seamlessly integrates into modern home environments, offering unparalleled control and quality of sound distribution. Designed for audiophiles and casual listeners alike, this powerful system enables users to enjoy their favorite music, podcasts, and audio from multiple sources throughout their home.

One of the standout features of the MRC88M is its 8-zone capability, allowing users to create and control up to eight independent audio zones. Each zone can customize its volume, source selection, and audio settings, providing a highly personalized audio experience. This flexibility means that different rooms can enjoy varied audio at the same time, making it ideal for entertaining guests or relaxing in private spaces.

The MRC88M employs advanced technologies to ensure high-quality sound reproduction. It uses a reliable audio matrix router that allows for the precise routing of audio signals between connected sources and zones. This ensures minimal interference and maximum clarity, making the listening experience rich and immersive. The system supports multiple source components, including CD players, streaming devices, and more, ensuring compatibility with a variety of audio formats.

Another key characteristic of the MRC88M is its user-friendly interface. Users can control the system using an intuitive remote, mobile app, or wall-mounted keypads, allowing for easy operation regardless of the user’s technical expertise. The customizable interfaces enable users to tailor the controls to meet individual preferences, enhancing the ease of use throughout the home.

Integration with smart home systems is another significant advantage of the MRC88M. It supports control via popular platforms, which allows homeowners to incorporate their audio system into broader home automation settings. This connectivity enables voice control and advanced scheduling features, making it not only a multi-room audio solution but also a vital part of a smart home ecosystem.

The MRC88M also features robust build quality and supports a wide range of speaker configurations, ensuring that it can accommodate both in-wall and traditional speakers. This versatility makes it suitable for any living space, whether in a new build or retrofitted into an existing residence.

In conclusion, the Xantech MRC88M is a top-tier multi-room audio solution that combines high-quality sound, flexible zone control, and seamless integration into smart home systems. Its advanced technology and user-friendly design make it a perfect choice for those looking to elevate their audio experience throughout their home.
Top Page Image Contents