Nuvo NV-E6DMS-DC XVI. NV-P2100 200 Watt Auxiliary Amplifier, RS232 Interface, NV-P2100 Amplifier

XVI. NV-P2100 200 Watt Auxiliary Amplifier

The P2100 is specifically designed for use with the NuVo	Fig. 21
Systems' lineouts. It can be used with either the fixed or variable
lineouts on the Essentia with either a 1/8” (3.5mm) to 1/8”
stereo patch cable or a 1/8” stereo to RCA patch cable, Fig 21.
There are two methods for triggering the P2100 from the Essentia
outputs. One is to set the POWER MODE switch on the P2100 to
Audio (the extreme left position) and allow an incoming audio
signal from the Essentia System to turn on the P2100. The second
method is to place the POWER MODE switch in the AC/DC
(extreme right) position. This will turn on the P2100 when the
Essentia is on. An additional feature of Essentia is zone specific
triggers that will trigger the P2100 only when that zone is turned
on.
Utilizing the voltage trigger requires a mono 1/8” (3.5mm) patch	Fig. 22
cable from either the System ON output on the Essentia to the
P2100 Voltage trigger input, or from the specific Zone Trigger on
the Essentia to the Voltage Trigger on the P2100, Fig. 22.

RS232 Interface

The RS232 port allows external two-way communication with the Essentia System. Home automation systems such as Crestron and AMX can be set up to operate Essentia. The RS232 addendum contains the necessary command sets for communication with the Essentia System.

NV-P2100 Amplifier

AUDIO				CONTROL
L		SENSITIVITY		POWER	VOLTAGE
		OdBV = 1.0RMS
				MODE	TRIGGER
INPUT	LEFT		RIGHT	ON/OFF SWITCH	3-30 VOLTS
	0		0	AUDIO AC/DC	AC OR DC
2
R
	+6	-12	+6	-12

INPUT OUTPUT

Essentia Amplifier

	VARIABLE			VARIABLE			VARIABLE
	OUTPUT			OUTPUT			OUTPUT
		OUTPUT POWER				OUTPUT POWER		OUTPUT POWER
	TIP=L		20W/6OHM X2	TIP=L		20W/6OHM X2	TIP=L	20W/6OHM X2
	RING=R			RING=R			RING=R
	FIXED			FIXED			FIXED
	OUTPUT			OUTPUT			OUTPUT
	ZONE 1			ZONE 2			ZONE 3
1	2	3	4	5	6	CONNECT TO
						NV-E6DX
						USE NV-SLC1
							CABLE
1	2	3	4	5	6
		SOURCE INPUTS				SOURCE LINK

NV-P2100 Amplifier

	AUDIO				CONTROL
	L		SENSITIVITY		POWER	VOLTAGE
			OdBV = 1.0RMS
					MODE	TRIGGER
	INPUT	LEFT		RIGHT	ON/OFF SWITCH	3-30 VOLTS
		0		0	AUDIO AC/DC	AC OR DC
	2
	R
		+6	-12	+6	-12
INPUT	OUTPUT

Essentia

Amplifier

ZONE 5

	2	2	3	1	3	5	SUM1
1
5	4	5	6	2	4	6	SUM2
	ZONE TRIGGER OUTPUTS				EMITTER OUTPUTS

19