Nuvo NV-E6DXS IV. Connecting the EZ Port to, Essentia amplifier Fig, Essentia Network Connection

IV. Connecting the EZ Port to the EZ Port

Essentia amplifier (Fig. 3)

When the EZ Port is installed in the wall the only part visible should be the faceplate and a single RJ-45 jack. The supplied pre-terminated network cable can then be plugged into the jack on the EZ Port and into the net- work connection on the back of the Essentia amplifier, Any Cat-5 cable terminated using 568A or 568B net- work wiring will suffice should you need a longer con- nection.

Fig. 3

Essentia Network

Connection

	PROGRAM
SYS ON
CONNECT TO	CONNECT TO
NV-I6EZP1	NV-I6X
USE NV-NC1	USE NV-SLC1
CABLE
	CABLE
EXT. MUTE
SYSTEM NETWORK	DIGITAL LINK

Network Cable

V.Attaching Audio Source Equipment to the Essentia Amplifier (Fig. 4)

Each piece of audio source equipment is connected to the Essentia amplifier with standard stereo RCA cables. Attach the RCA cable to the corresponding audio output on the source equipment and to the desired source input on the back of the Essentia ampli- fier.

	VARIABLE			VARIABLE			VARIABLE
	OUTPUT			OUTPUT			OUTPUT
		OUTPUT POWER				OUTPUT POWER		OUTPUT POWER
	TIP=L		20W/6OHM X2	TIP=L		20W/6OHM X2	TIP=L	20W/6OHM X2
	RING=R			RING=R			RING=R
	FIXED			FIXED			FIXED
	OUTPUT			OUTPUT			OUTPUT
	ZONE 1			ZONE 2			ZONE 3
1	2	3	4	5	6	CONNECT TO
							NV-I8X
						USE NV-SLC1
							CABLE
1	2	3	4	5	6
		SOURCE INPUTS				SOURCE LINK

Source 1	Audio
Tuner 1	Out

Fig. 4

14